Epoxy Resin 1 Gallon Kit for Crystal Clear Countertop Arts Craft, River Table Tops, Jewelry Making, Wooden Repair with Gloves and Spreaders Mother's Day Gift

The media could not be loaded.  I want to start with saying normally I buy “name brand” epoxy resin that you usually see YouTube tumbler makers use. I ordered this epoxy resin because I had a huge project to do and I didn’t want to pay $130 for a gallon sized kit. For this price I was a bit worried but I read the reviews and went for it. And boy am I glad I did! This stuff is amazing! First let’s start with the packaging-better than name brand. Usually the “name brand” is just the jugs it comes in, inside a shipping box. This stuff has its own (very tasteful) packaging box. Inside the box, they gave complimentary mixing CUPS, 2x 300ml and 2x 500ml, 3 pairs of nitrile gloves (a little small for my giant Baganda but they worked), a spatula for mixing, 5 xl droppers and a disposable table cloth to protect surfaces. And instructions. The epoxy resin is so quick to mix, and if you mix slow enough(not super slow just mindful of bubbles) it’s mixed in less than 3 minutes. And is it crystal clear?!? You have to see for yourself.There were some bubbles on my first pour but that was my fault. ALWAYS ALWAYS ALWAYS, return to your project about 30-40 min after it’s poured, and pot any remaining bubbles that have made their way to the top, I prefer using a torch, but a heat gun works well too.I think I’ve found my new and affordable epoxy kit! I’ve included a picture of a sample pour I did with no color or glitter so you can see how clear it is.Update:I absolutely love this epoxy for the tray I did. I wish I would’ve went with my gut instinct and NOT tried it on tumblers-I’ve been sanding my butt off for two days. I only tried applying a flood coat to the two tumblers I was recently working on. As soon as I started to pour, I knew it was gonna be bad. And boy was if. It’s far too thin to do tumblers. No matter how thick you try to apply it, it gets dips and and fisheyes oh well lesson learned. The tray I was over the moon with. I still believe this is well worth the money!

I have been pouring resin for four years and have tried many different types but this by far is the easiest resin to use. It works well in cold or warm weather and mixes easily. I will never buy another brand. It's also very affordable because I haven't sold my stuff I really just do it as a hobby and give my pieces away. It makes me feel good to make people happy!

Hardens very nice on table top but edges come out runny looking. This resin seems/is thicker than others Ive used

I loved the box with all the different items inside!! I bought this for a project for my daughter and me to do together seeing how she has been so excited to try as well as myself. When I received my package the resin and harderener leaked out all over the package it was in...when I contacted them I was offered a complete refund or a partial one...seeing how the resin was the only problem I opted for the partial refund so.i can just buy more resin!! The seller was amazing working with me and helping make my daughter happy. The only thing I didn't like about the box was that it didn't include any molds I didn't have to purchase that seperate!! Thank you so much for your time, patience, and a wonderful starter box!!

I love how Crystal clear it comes out, very few or no bubbles. I like the thickness of the resin, the curing time is incredible and it was fun to use. This is by far my favorite, I will be buying this product from this seller all if the time!

I have been pouring resin for over 5 years now. I have always been a fan of the expensive Urethane resins such as Alumilite where you have to use a pressure pot to cure. Lately, I have been pouring some larger items and wanted an Epoxy based resin so I didn't have to cure under pressure. I have ordered around 30 gallons of this stuff over the past couple of years and the quality of the castings has always been AMAZING. I pour in 35 degree weather all the way up to 90 degree weather with no problems. Hint: when cold, I use a cardboard box with a reptile heating pad to warm the resin to 75 degrees before pouring. I have poured thin items of 1/8" all the way to 6" x 6" hybrid casts with no problems. This epoxy must be measured 1:1 by volume. If you use a scale in grams (more accurate) then your ratio would be 1.121:1 ratio. So if you would mix 56 grams of Part A to 50 grams of Part B for a total of 106 grams.This product has never let me down. I always stayed away from Epoxy Resins because of the smell. This product has ZERO smell and I cannot even tell it is curing on the far side of the garage. Another tip: This resin takes a while to setup (at least 4 hours). If you want to speed it up, you can put your mold in a small toaster oven at 130 degrees and it will harden in about an hour.

The only thing they would need to fix is the actual bottles because it doesn’t pour out very well. Other than that it’s good.

I received my package today and I was very anxious to see if the resin would come in with no leaks. I was nervous to order, but after seeing a recent review that the tops had changed and there were no longer any leaks, I decided to go ahead and give it a try. I am happy with my decision so far, because there was no leak problem, and the bottles were inside plastic wrapping. My only problem is that the measuring cups aren’t actually silicone, but I don’t mind so much because they are larger than what I already have. I will update my review once I’ve actually worked with the resin, but I wanted to immediately note that the leaky issue appears to have been fixed.Edit: I LOVE this resin. It cures quite quickly for me, looks great, and I really like that you use equal parts of A & B. Definitely will be buying more. Oh, and my cured items seem to have a pleasant smell after using this resin, which is also a plus for me. Changing to 5 stars.

I like this product but I'm tornThey have O (zero) customer service, nobody mans the Facebook, no phone number, no email NOTHINGANDYou get a discount card for a discount on your next order but YOU CANT GET IT, the app is not valid and nobody answers why on Facebook so its basically false advertising and I have a problem with thatThis is the reason I gave it half the stars I would have.As far as the product goes. It's good, it does have bubbles but leave it in water or on your heating pad for about 15 min in water and 10 min on pad and you get less bubble.

Love the vibrant colours, I'm new to alcohol ink so I'm excited to give these a try.

I have used resin before on other products and never had an issue. I followed the instructions to the letter for mixing with these (it's not rocket science) and on all three tumblers the resin separated and ruined the cup. Not impressed.

This product feels like a Temu product! The quality is ok, but the packaging is cheap and some of the ink bottles leaked.