LEATHERMAN, Bond Multitool, Stainless Steel EDC Tool with 420HC Blade, Built in the USA

I carry a multitool daily for work and have lost a couple as a result. The bond is basic, compact, and built with a purpose. The new blade shape is safer since it had an issue with wear and the blade popping up when in use and is also really easy to sharpen. The plier pivot screws were really tight and tighten uneven. I had to loosen both pivots a little to allow the pliers to open even and allow for easier use (no wobble). This is my main grip with the bond. The pst2 can be flung open one handed. The bond I doubt will ever be able todo this as the friction system they have will likely not wear in and will always keep tension. For size, weight, and price, the bond is the perfect job site multitool. Has all the basics and no extra fluf for me. The Arc is 100x better in every other way but its bukly compared and a few extra tools that aren't used by me. The Arc is like an extension of you. Easy and quick access to everything. Small jobs are done in a flash. An all in one system. No need for a pocket knife. The bond is just a tool. Convenient but slow. A working man's multitool who gets paid by the hour. Tool is built stronger, philips works better, less dust, no cleaning, beat it up and keep on going for a lifetime.

I got an original PST (and a mini) back in the early 90s, and it was my treasured companion through many adventures, backpacking through Europe, hiking the Northeast, and a worthy accomplice for breaking and fixing many things along the way. After 9/11, I had to stop carrying a knife on the daily, since I would inevitably lose it in the airport. I lost my mini this way, and have been a jealous guard of my PST since, keeping it in my hiking pack where it will never see an airport or a metal detector. Leatherman has come out with many models since, but none had the rugged simplicity of the PST. I got a Fuse out of necessity, and it's made in China, a few material layers thicker, and had some useless rubber handle features and extra blade locks. I started searching EBay for PST replacements in case I lost my last one, since the modernized Chinese-made versions are NOT the same as the original. The Bond IS that PST, or might as well be. Other than the missing 'Made in Oregon' stamping, it's the same rig... the same excellent pliers, the same capable blade, the badass file that eats metal. It lost the lanyard loop and gained a thumb grove for the knife blade - a reasonable trade - , it gained some rivets for the hinge, but it has the same winning form factor, the slim nose detail that makes it pocketable, as its granddaddy. I'm buying a bunch of spares to stuff in a drawer in case I lose my PST... and if I'm wrong and manage to keep it until the very end, my heirs can fight over these replacements at my wake.

It's a Leatherman so you're obviously going to get pretty good quality not to mention just as they said in the product description it is lightweight and very easy to carry. Although when folding or unfolding the tool or even when trying to access any of the other tools within I help but notice everything tends to move with a fair bit of resistance that I've never noticed in any other Leatherman tools that I've owned. I attempted to remedy this by applying some oil but that did not seem to make a difference so I assume that it must be an intentional sort of thing with this specific model. But that aside the resistance in no way affects the usability of the tool. Not to mention I've been consistently carrying this tool every single day since I got it. All that aside I'd definitely recommend this tool if it's something that one could find themselves using.

I finally lost my PST after ~25 years. Since my primary interest was in the pliers, I got one of the lower end models that was closest to the original. This is improved in every way from the original PST. The edges are rounded, so it can be squeezed harder without killing your hand, the opening mechanism is more solid, and the tools are more thoughtfully arranged. Time will tell if it has the same longevity of the original model, but I don't see any defects that would indicate early failure. One of the big problems with the original was some of the tools could collapse in use. The phillip head screwdriver was particularly egregious. Yea, if it's closed, it won't snap shut on your hand, but that's little consolation after slamming your knuckles into the work surface. All the tools /tend/ to stay put in use with the Bond. If one was using the interior tools all the time, it might be a good idea to get one of the models with locking blades, but for occasional use, the Bond is fine. If used as directed, you won't have amputated digits. So... If you liked the Original PST, this is the same thing but better. It's a good tool at a good price. If you think you want something more. I can't help you. Checkout some of the other models. I've always been happy with Leatherman's workmanship. There's a quality Leatherman available for whatever you want to do.

The good: This is a quality, sturdy classic Leatherman. Built well and the tools are nice and solid. The weight and form are so much lighter and slimmer than their other models, which is what initially brought me to this. And classic/vintage style. Don’t fix a classic, right? Normally, but in the case… The bad: very stiff. Not just a little, but overly tight. That’s good for the tools to stay in place (non-locking but secure). It’s bad, very bad for the knife blade. Opening the blade takes too much strength and force; very dangerous when you have a razor sharp edge that will slice through your finger if you slip. Lots of force plus sharp blade doesn’t equal anything good for the user. And closing it was equally dangerous. Then imagine being outside and quickly trying to open it in the cold with frozen fingers, or hot sweaty palms. Overall, it’s a shame because it’s a nice slim, classic tool built very well. But the knife is just too dangerous for me. I much prefer the improved “Wave” design for blades that lock. Those open smooth and lock solid. Oh well, I guess some things are best left in the past.

I got to start by saying i AM OBBSEEESSED WITH MULTI TOOLS. I BASICALLY OWN THEM ALL SO TRUST ME. U GOTTA HEAR AN SEE THIS!!! LITTERALY JUST LOOK AT MY PICTURES OF THIS ABSOLUTE LEGENDARY GOD MODE OF A FILE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! THIS AND THE LEATHERMAN REBAR HAS THE MOST AGGRESSIVE LEGENDARY FILE U WILL EVER SEE ON A MULTI TOOL!!!! IT IS LITTERALY IDENTICAL OR BETTER THAN VICTORINOX!!!! WILD!!!!!!! NOW if ONLY we can get THIS FILE AN HAVE DIAMOND COATING ON THE OTHER SIDE!?!?!? BROOOOO THAT WOULD BE A DREAM COME TRUE!!!!!!! 1 can dream am I right??? In my opinion inless its a SATANIC TYRANNICAL KNIFE LAW that u should ignore anyways cause GOD has granted u FREEDOM as your BIRTH RIGHT. I'd recommend personally the rebar. (THE REBAR HAS MORE FEATURES AND LOCKING IMPLEMENTS NOT SLIP JOINT LIKE THE BOND). BUT the bond is prety awsome as well. U can't go wrong with either 1 CAUSE THEY BOTH HAVE THIS LEGENDARY FILE the rebar has the serrated and saw thu as a plus vs the minimalizm of the bond . Either way final conclusion it's a good buy and at an incredibly LEGENDARY price. U won't be disappointed!!! AND JUST TO SAY IT 1 MORE TIME LOL . DID I SAY OMG LOOK AT THAT LEGENDARY FILE!?!?!!?! hahahaha 🤙👍🙋‍♂️

I have carried a leatherman for years, over 20, a gift from my wife. Then, I misplaced it. Couldn't decide if I really needed another one, but finally bit the bullet and bought this. There are quite a few changes from my original leatherman to this one (same model). Most I think are ok. However, it is very stiff and difficult to open and close. First time with the knife, I cut myself closing it. I am always amazed at how often I reach for it and it is really annoying how difficult it is to open and close. The value of the tool more than outweighs this little annoyance. BTW, I am on my second leather case and this one fits right at home.

I carried a Leatherman Squirt (the old version, with the awl instead of scissors) on my keychain since the model was introduced. I broke the pliers once and Leatherman sent me a replacement. However, I use the tool all the time and I was looking for a more substantial toolset. The Bond fits my needs perfectly. The toolset suits me very well. I primarily use the pliers, the excellent Phillips head screwdriver, the knife blade. and the ruler. When folded, the Bond is well finished and smooth enough that it doesn't catch on anything in the pocket. It is also light enough that it isn't uncomfortable to carry in a pocket. It is comfortable to hold when using the tools. Finally, it has a carrying ring which is necessary for attachment to a keychain.

Excelentes materiales para toda la vida! La marca es la garantía!

Eviten comprarla, viene sin funda, y la navaja se siente de muy mala calidad

No me gusto que compre dos piezas y solamente recibí una.

Summary - My purpose for this tool was primarily to EDC pliers and the pliers are excellent, as is the overall construction and weight. Only reason why not five stars is that one of the arms is hard/tight to close, however, I expect this to wear in over time and or with use. Overall, I am happy with the purchase and expect that will be carrying it for a long time. Your intended use may be different than mine which will determine whether or not this tool is a fit for you. However, I would suggest that if your going to buy that you buy from Amazon or some other retailer where returns are easy since I have never been lucky with Leatherman quality. Case in point the sticky/hard to close arm which, I feel, will require some time to wear in. Also, an online review I seen showed loose tools in the Bond, however, all the tools in mine are properly tight. The tool, by design, has a very limited range of tools. I am ok with this since the primary purpose for my buying was to cut down on weight / duplication of tools. The Bond comes in, based on my scales, at 5.37 oz (163 gr) which is significantly lower than the Victorinox Spirit at 7.4 oz (210 gr) or the Wave, without bit sets, 8.5 oz (241 gr). I was primarily interested in the pliers and the Philips screwdriver, both of which are excellent. It is slightly heavier than the LM Kick, discontinued, 5.3 oz (152 gr) but significantly better constructed being all steel. Note, the Bond is also significantly thinner than the Spirit and Wave and given its size and weight can be easily stored in my pocket instead of in the provided belt pouch. The tool itself is nicely rounded so I don't think there is any concern about tearing your pocket. Having all the tools stored inside the tool may be an advantage for pocket carry as there is less chance of dirt getting in amongst the tools. Note, a pocket clip can be bought separately. The two tools that I was focused on were the pliers and to a lesser extent the Philips screwdriver. The pliers are similar to the old model Wave ones without the replaceable cutting edges. Due to the all steel construction of the Bond I think that the pliers in actual use will be able to take some significant abuse, similar to the Wave or Spirit. I am ok with not having the replaceable cutting edges as this is not something that I typically use. Note, I like the LM pliers over the Victorinox Spirit as the needle nose is longer. The Bond feels very good in the hand with no sharp points etc. The Philips screwdriver is good and I think I have an old LM bit kit to use with it if need be. For whatever reason they included a file instead of a saw in the tool set. Neither of these are key for my EDC use. Although, having a file is nice since it allows me to pair the tool with a mid-size SAK that has a saw. However, some may feel that a saw would have been of more use for them. Note, none of the tools are one hand accessible or accessible without opening up the tool. This may be a limiting factor for some people. However, I'm ok with this since I prefer to also EDC a folding knife and a mid size Swiss Army knife. As such I really don't need to access the tool except for the pliers. Note, I really like the quality of the Victorinox Spirit and its tool set. However, now that I have the Bond which I feel is a significantly better EDC tool for my purposes it will end up in my desk drawer. The Wave that used reside in my desk draw will now move to a tool box where its bit kit may come in handy.

Considering it’s Leatherman’s cheapest tool with the most options. I would buy another one just to have. It’s a great lightweight EDC. That can take on light-medium tasks without hesitation. Of course I would recommend the P4 for heavier tasks. Although the $140 price difference is enough to make me want to buy a second Bond just for heavy tasks 😆 For $70 with shipping. I’d definitely say get one. It has its flaws but everyone has there own opinions on it. I say YES