Metal Pin Backs

I recently used these metal locking pin backs for a trip to Disneyland, and they were fantastic! They kept all my pins securely in place throughout the entire trip, even with all the walking, rides, and movement. I didn’t lose a single pin, which is a big win compared to past trips. These backs are easy to attach and remove, and they fit snugly on the pins without damaging them. If you’re a pin collector or just want to make sure your pins stay safe, these are a must-have! Highly recommended.

These were great for our recent trip to Disney World. These backings grab hard and do not let go. They are *way* less expensive per backing, and easier to use, than the ones that Disney sells (you know, the ones that use a tiny Allen wrench to tighten the grasp). Our family bought a number of souvenir pins, affixing them to lanyards and backpacks, and didn't lose a single one despite lots of roller coasters, fast-walking between attractions, and so on. They are in fact a little hard to remove until you get the knack (press down on the far flange with one set of singles while pulling up from the middle with the other), but I'd rather that than having pins fall off, or having to stop and work with a tiny screwset.

I bought these after I lost a pin my brother bought me at Yosemite that was discontinued so it cannot be replaced - it had a rubber clamp, so I should have known better... I realized there were other pins I could lose that were similarly not replaceable, so I searched for clamps that lock better. Some of the reviews mentioned not being able to get them back off, which I have not had a problem with. They are certainly more secure than the original clamps that came with my pins. This way, I can still wear those pins and not worry about losing any more of them. I have plenty of them left over for any more pins I get in the future, or if these clamps get loose over time.

I kept losing pins on my backpack and I hate that! Especially when you can spend $10 on just one! So, these are awesome! My pins are knocked around and they STAY on. I would definitely recommend to anyone who is tired of losing a precious pin and keepsake.

Stays on great, kinda hard to take off sometimes

I got these to replace the traditional backings for my daughter's Girl Scout awards. They worked so well, I'm using them on my uniform. For most of the ones I've used thus far, they make a slight click when they're in place properly. Seem durable and quality thus far.

I saw some reviews saying they could not get them off. There’s a clip on the back that you pull to release them. I have not had any issues taking them off, and they are secure!

These are absolutely amazing! Pins would fall off my kids’ backpacks all the time and these totally solved the problem. I pulled about as hard as I could and the pins wouldn’t budge with these on the back. Definitely recommend.

The media could not be loaded. I bought these as well as the locking backs with the tiny screws back in February 2022 and waited until now [October 2022] so I could make the best review I could of this product.These are truly great and I prefer them over the backs that come with the screws for a few reasons, I will list said reasons below and provide an explanation. I’ll also add a bit at the end of how to take them off since a couple of these reviews seem to be about that being difficult when it’s just a small learning curve to get over.Reason #1: AffordableWhen I bought these they were actually cheaper that the locking backs that came with the screws.Reason #2: StrongThese backings ensure your pins are staying put! I use them on my pins on my jacket and they have been through a rough time for a few months, but I haven’t lost any pins. I checked one of my pins before writing this and it had actually bent from being tugged on by my bag strap and yet the backing stayed on. The pin physically bent instead of this backing coming off!Reason #3: Easier and FasterThey are sooo much easier to attach, you just have to push them on like a regular backing. The other backs require you to use this tiny tiny screw and Allan key wrench every time you put them on and take them off, makes moving and repositioning pins very time consuming.Removing the Backings:Yes, like some people mention in their reviews, the backing are a little hard to remove at first but once you know how to it’s so much easier than the screws. This might not make too much sense but I’ll try to explain how to. You need to pull on the end circle while holding the rest of the backing in place, almost like you’re stretching or pulling it apart, and the backing should release the pin. I added a video to my review too of how it looks, hope that help! It’s a little hard to do it with one hand but eventually it’ll get easier, like learning how to undo a bra with one hand, it’ll take a bit of practice haha!I hope this helps if anyone ends up reading something this long lol.

Really impressed with these. They hold on super tightly to my pins, so I don’t have to worry about them coming loose from my jacket or bag.

Bought these for pin trading at Disney and for my pins I want to keep on my bags while visiting. These worked great. Not one pin fell off and my pins on my lanyard were being thrown around. No tool needed. The Disney backs are not needed when trading as the trader just keeps their backing. These pins lock into place firmly. Remove by pulling the flat cap out first and then pulling off the backing. Will definitely be purchasing again.

My child's uniform has a lapel pin. It came with a basic brass backing that they lost immediately on the playground.Fortunately the pin wasn't lost. And this backer holds strong!I actually can't take it off!!

I love pins. I love wearing pins. But I also get extremely attached to material things I love. Especially pins. These pin backs are awesome! I did need to google a tutorial on how to take them off (pull on the back part) but they worked very well because I struggled for an embarrassing amount of time trying to get my pins off 😂