Single-Stick 4 oz | Pool & Spa Repair | Easy for Anyone to DIY | Works Underwater or Above | Fix Cracks Leaks in Concrete, Fiberglass & Other Surfaces | by Atlas Minerals

For a pool owner, this would get a Product of the DECADE recommendation! Without going into too much detail, let's just say this stuff solved/plugged a skimmer leak that I was told would require major excavation/intervention to correct. I made the mistake of believing the product would work better if the surface being repaired was totally drained/dried out for a couple days. FALSE! I did rough the surface up quite a bit with Scotchbrite & cleaned it with brake cleaner but when I went to use this product mixed per the directions, I was a bit disappointed in how it was setting up/taking shape UNTIL I accidentally got a little water onto the area I was trying to repair. Instantly it started becoming malleable, turning into a proper paste, adhering to the surface & behaving as I would expect it to. A month later, pool still holding water perfectly & I only used about an inch worth of product. I still have LOTS more for any other leaks/future problems. The repaired area has since set up & feels like concrete. More importantly, my pool hasn't retained water like this since I put it in. Bottom line, this stuff works WONDERS. Just make sure you're not afraid to get it wet because that's exactly what it needs to work properly. Just don't be a dummy like me & overthink the chemists who designed it.

I discovered a leak in our skimmer box. I had to move a loose tile to find it. I was able to smooth and tool it over the area way easier than I expected. It hardened to the touch in under an hour (pool water was about 87 degrees) and air temp was in the 90s. I felt and saw no difference in working with the portion in or out of the water. I think the easiest mistake to make is not mixing enough. I set a timer for 5 minutes and didn’t stop even if the mixture looked one color. You will feel it get quite warm when the reaction is actually happening. Hopefully I won’t need to do any further repairs soon, but thankfully I have enough material left to do some If needed.

Repaired my pool steps without draining water. The repair is almost invisible and only took about 5 minutes to complete. Great stuff!

So far so good. Use gloves when mixing because it tends to get stuck on your skin and everything else as you use it. Jamming it deeply into some of the cracks around my pool tile. I stopped a slow leak. Very inexpensive and no experience needed. The only downside is that it looks wonderful bright white, which makes you want to finish all grout lines so they are evenly bright and beautiful.

Great

I had a leak along the seam between the skimmer housing and the pool stucco. I mixed the product and applied it to the seam with a little bit of water as the skimmer housing was lower than the stucco so it was applied wet. It dried in thirty minutes and I tested with the leak detector and found a tiny leak in the corner and applied some more compound. Tested again thirty minutes later and no more leak. Worked perfectly.

I bought this to fill a chip at the bottom of a fiberglass pool. It worked and is a smooth finish. I was just surprised that is a white product. Excuse my ignorance, but from the pictures of the product I assumed it was blue and would more closely match the bottom if my pool.

Very nice product. I used it to repair cracks in a pool skimmer which I believe is ABS plastic. Way better than the JB Weld product that failed after about a year. Very easy to mix and apply. Sticks better than the JB weld, and the finish is a lot nicer. Worth the wait and extra cost. I recommend.

Todo llego ok. Muy buen producto.

Worked great for sealing my pool light cable. Sets fast

Buen producto

Make sure to use cloves

Worked perfectly for intex big swimming pool. All benefits as described.