SRAM PC-1051 Chain 10-Speed 114 Links Single Use Master Link Steel

It's a good "working man's" chain. By that I realize it's not the chain to put on your $8,000 carbon-everything race bike. If you're weighing everything to the gram level, you're better off with a hollow-pin chain (KMC has the best prices on those, IMO). For a robust, get-the-job-done chain that comes at a very reasonable price, these are a great way to go. I'm a bit of a large meathead type on a bike (former wrestler and football linebacker turned cyclist) and sometimes I just don't know my own strength and I'll start with way too much power on the pedals from a cold start. This has resulted in a snapped chain more than a few times. For that reason alone, I'm not willing to shell out $80-$100+ for each chain I get. I've put these on a few bikes now and I've always been pleased with the result. I also recommend getting a pack of the KMC Missing Links here on Amazon as well and throwing them in your cycling pack (helps out with those aforementioned snapped chain incidents).

A really great replacement chain. I have about 580 miles on it now and have seen no change in performance. My application is mountain biking so I am not kind to my chain. I attached an image of my old chain to demonstrate my lack of kindness toward bike chains. Notice how I have cracked a roller completely off of my old chain. The new chain runs very quiet with no sticky links. The new chain looks to be of a more precise manufacture. Although Onogo US delivered promptly..ahead of schedule..Amazon still thinks my order is in transit. As such I will rate Onogo as a great seller here in my review since I cannot rate sellers until Amazon thinks they have delivered. Thanks Onogo US!

SRAM chains are fine. They are comparable to Shimano and KMC chains. I can report that this 10-speed SRAM chain works well on a Shimano 105 5700 drivetrain. Buy what's on sale and keep pedaling.

I have always used Shimano chains on my 10-speed Shimano drivetrain. But, I was fixing up a bike to re-sell, and this chain was $10 cheaper than Shimano. Looks nice. Easy to install. Shifts just fine; I have had issues with SRAM chains before, but this one works well.

I had never changed my own bike chain before so I had to YouTube it, but once you do it once its super easy after that. A pair of chain pliers makes it really easy and a little less messy. A couple quick tips; You will need a chain break tool, which is included on most bicycle multi-tools. This will allow you to size the chain to fit your bike. The job is made easier with a set of chain pliers, but you can also use your hands or a set of regular pliers to remove the quick link with a bit more difficulty (depending on the condition of the chain), chain pliers just make it easier because of the special notches that perfectly fit chain links. If you use the "large sprockets, plus 2 links" sizing rule, the length may fall in between links or land on an outer link instead of an inner link. Just move to the next inner link and break the chain there. Once you've sized the chain and connected the quick link, you may see a small gap in the quick link and wonder if you did something wrong or got a manufacturer defect. The chain just needs to be pulled all the way tight and this might not be possible with greasy hands, but holding one wheel and pressing the pedal should provide sufficient force to tighten the chain the rest of the way and snap the quick link all the way into place.

I've tried chains from various bands including Shimano and KMC, but this one is the best I've had. it run very quit, easy to install and remove (if you want to clean it or other parts like the cassette) and it last well (my Shimano XT chain broke). I was using it throughout the winter in mud and dust and it really held up well. and the price is the icing on the cake in this case. BTW I'm running this chain with Shimano cassette without any issues, so don't worry about comparability issues

This chain is an excellent replacement for a 10 speed cassette. Although it's made by SRAM, it's fully compatible with Shimano equipment as well. I'm using mine with a Shimano Ultegra 6700 group. I got about 2,300 miles from my last chain which included a lot of climbing. I think that's pretty good considering how thin these 10 speed chains are. I also like the "Power Lock" master link that SRAM uses. It makes installation very easy.

I bought this as a replacement for the stock Shimano chain that came on my Cannondale with 105 gruppo. I replaced it because the original chain had stretched well beyond the point of replacement, and was missing shifts up and down. I went with the SRAM because it uses a master link, making it much easier to install. It took about 10 minutes from out of the package to on the bike. You will need a chain breaker to remove the excess length. It hasn't missed a beat - or a shift - in 500+ miles. I recommend that you measure chain stretch if you're having trouble shifting. If you let it go too long it can damage the cassette and chainrings. And if you do replace it, I recommend the SRAM!

Die Kette hat ne super Preis/Leistung. Nach ca. 2500 km (am Trekkingrad, gepflegt, auf der Straße, wenig Berge) annähernd keine Längung. Läuft immer noch ruhig und schaltet sauber. Tolle Kette, werde ich wieder kaufen. Update: Nach ca. 3500 km längt sie sich so langsam, wechsle sie daher demnächst , läuft immer noch sehr ruhig und schaltet sauber.

Bra vara, bra pris. Lätt att montera tack vare snabblåset

Mi bici se siente tan robusta con esta nueva cadena. Confianza y desempeño.

A este nivel de calidad no se notan diferencias pero ya la llevo usando mucho tiempo y la vuelvo a comprar porqué tiene un peso inferior que las KMC. La verdad es que incluye el eslabón rápido y eso es de agradecer. Repetiré. El producto viene tal y como aparece en la foto.

After having had several snapped chains and struggled with fitting new ones this SRAM chain was extremely easy to fit. You need a chain tool to remove a link if you need to shorten to shorten the chain, but once the chain is the right length you just fit the PowerLock and job done! Works really well and the chain is really strong.