F160

A co-worker recommended this brand, but he uses a different model for setup with larger monitors. This particular stand is rated for monitors up to 27", which is what I am using, so I'm at the high end of its range for size, but probably not weight. The specs say it can support up to 19.8 pounds per strut, and the two I'm using might total that together. The unit can be mounted either using the two clamps included for a table edge, or in a grommet in the desktop. I can't speak to the latter installation, since the desk I'm using doesn't feature grommets in the desktop, but the table edge mounting clamps (2) seem plenty sturdy enough to keep the unit solidly in place. Assembly looks a little intimidating when you first open the box, but the instruction sheet is clear, well organized, and mainly picture driven, though there is some text where it's useful to have additional information. Where the arm meets the monitor, there are two full sets of screws in each of two lengths, and spacers in two sizes if they're needed to adjust to your particular brand and model. I didn't need to mix and match, and didn't need the spacers either, but they're included in the hardware kit if your mileage varies. My desktop isn't very large, and I'm limited in the space available on either side, so the adjustments had to be pretty flexible. I'm happy to report that both monitors now hover above the desktop, allowing me to move them closer if necessary, which was an option I didn't have before. Time will tell if I find a flaw in the setup, but it hasn't happened so far. Overall, a very good unit and a good value for the money as well. Definitely recommend.

I purchased this item mainly to save space on my small desk. I had previously bought a dual monitor mount attachment, which I attached to a laptop desk mount I already had. Unfortunately, the weight of my monitors (both 24" LCDs ~11-12 lbs.) caused the mount to start tilting. I honestly took a chance with this product (I had never heard of North Bayou before), but it had good reviews, and the weight limit for each arm was more than enough for my monitors (if I remember correctly I think they can hold up to 27", but don't quote me on that). So that's WHY I bough it. WHY I LIKE/LOVE IT: 1) Saves space!!! Just like I was looking for. I don't know who wouldn't want more space on their desk. The arms pivot almost any direction, definitely any direction that makes sense. The support on the pivots and screws are extremely durable, so the monitors stay where you set them. I've brushed/knocked into mine a few times, and my desk is extremely unstable (or I just type way too ferociously) and the monitor's just don't move!! My old set-up, it was always a matter of time before one or both of my monitors just lost tension and fell. 2) CUSTOMIZATION! Kind of mentioned it in the first point, but these arms have great hold on the position of the monitor. With that being said, you can rotate, tilt, move, whatever you want to do, these arms let you do it! And like I mentioned already, IT WILL STAY IN PLACE. 3) Cable management: I normally find most products that claim cable management....frankly sucks. This mount comes with cable management for both monitors starting at the arms, stays *INSIDE* the arm (hard to explain, but they're almost invisible) and comes out the back, virtually out of site. AND it also comes with cable management for your keyboard and mouse or any other desktop USB cables you may have. This is one solid product! It does what it says and it does it well. It even came with a few shocking features for me and has really made my desk organization ability much better. I've always had to rearrange my desk configuration recently. Thanks to the easy manipulation of this mount, a task that might've taken me an hour was accomplished by re-arranging the arms of the mount slightly, taking a whopping 7 seconds! ANYWAYS, IF YOU HAVE 2 MONITORS, NEED MORE DESK SPACE, BUY THIS!

They look great. You can move them any way you want your monitors to look. Mine sit side by side perfectly. Price is good. These arms sit next to each other like a space creature. I had ordered 3 different type of monitor arms where the pole sits in the middle and you put one arm on top of the other and i couldn't get the monitors to sit evenly next to each other so i had to return them and they were so hard to move around. They are good sturdy arms, i just could not get to do what I needed them to do. The tension is hardly to play with. I like having a pole in the middle with the two arms out but... I am glad found these different ones. I highly recommend. (the last pic is the other monitor arm I purchased and you can see I just can't get the monitors to sit evenly next to each other. ) They are good arms, i just could not get to do what I needed them to do.

I bought this when my wife kicked me out off of the kitchen table during COVID and I bought an adjustable desk to work out of our guest room. The stands work well for what they are and for the price. Very sturdy. My only quibble is that they are about 5" too low to be ergonomically correct. I'm always looking down and not straight ahead. I didn't see anywhere in the description where it talks about the height so just be advised that they may be a bit low. I'm 71" tall. I think I'll look for a taller set of arms.

Stop looking! buy this! I can not believe this product! blown away, I got the dual arm and couldn't be happier. I got a different one a week ago and instantly returned it... it was junk but only ten dollars less. I was actually so discouraged by the other one I had stopped looking till this was auto suggested to me. this thing is like a rock! sturdy as can be. built very well feels substantial (because it is) overall the thing is great but it's the little things that put this over the top. the mounting plate that attaches to the monitor actually has the top holes key holed, so you can put the top bolts in half way slide it in place have it held as you attach the lower bolts. doesn't sound that significant but that mean someone was thinking about this product and how to make it better not cheaper...let that sink in for a second. they made it better not cheaper. this has examples of that kind of attention to detail and thoughtfulness of design all over it. the cable management is clean looks nice and works well, makes me want to get some colored braided HDMI cords. its so clean! the gas struts and adjustability is great. you know you look for some products on Amazon and just don't have that confidence that you will get something nice well this is confidence inspiring. I don't know what more to say but can't say enough. buy it! if you are in the market this is the one!!! I'm so happy I might put this company and seller on my holiday card mailing list invite them to my wedding and let them baby sit my kids! buy and enjoy.

My desk is 52.0 W x 33.0 D x 35.0 H so the thickness is pretty big in the back because of the draws built into the desk. The clamps that come with the mount is a big clamp so other tables should be fine just mine is way too thick. So I just screwed the mount right into my table. And it’s not going anywhere. I’m currently using a 27” Asus Rog PG279Q & 24” Asus VG248QE in Portrait mode. And didn’t have any issues removing the stock stand and mounting it. Both are 100x100 Vesa and I used the included screws with the mount since they were a little bit longer then stock. And felt more secured compared to stock screws from the original stands. Once I mounted everything I used the tool included to loosen the tension on the mount because they were way to tight and when you went to lower the monitor it would spring back up and uppercut you. Once I loosened it to where I can freely move the monitors up/down/sideways it was perfect and little to no force is needed. Wire management is pretty straight forward you can unscrew under the arms a plastic piece that has 1 screw and you squeeze the other end to pop it off. I unscrewed it just enough before it would completely come off and tucked the power wire and display port cable inside it. I don’t think you would be able to fit three cables in there especially if one is real thick. Overall I love it compared to stock stands it just much cleaner looking, I have more space and monitors are floating which looks great lol. Hopefully this helps anyone looking to buy one.

These worked fantastically. They installed easily although somewhat akward when your desk is against a wall. Everything has clearence to fit its just working upside down and backwards. The thing I like the least on these is the cable management it requires a screw and clips to be removed under the arm. This is really difficult to get to from the desk, so you have to do it blind. It would be BETTER if the CM was on the top of the mount, or if it did not require the screw. Overall I got it to work, and was able to run the web cam cable from my pc under the desk up to the monitor. It easily accommodated monitors of different sizes, which allowed me to setup my unit's the way I wanted. You can rotate and move the monitors easily and they stay in place well. I have had these for over a year, they still hold strong, but are still adjustable. There is not give or slack in them after a year that some inferior product might have (droopy monitor syndrome. These did everything I expected them to do and more. They added that nice touch of scifi, and removed the stands from my desk. I am really happy with these and I think for the price they cannot be beat.

This mount was easy to install on my desk and add on the monitors. Adjusting side to side is easy, but it took a few times to get the arms at the right height. Overall, good quality and easy to use for the price.

Just received this mount and it was a breeze to setup. Just a few screws and pop in the arms and you're done. Range of motion is excellent, you shouldn't have an issue getting the monitor in any location that you need. The cable management on the arms was extremely easy to use and I could fit the cables without issue (Unlike another monitor mount I am using at work currently). Solid build, for the price this is surprisingly well made. In the photo's I am using 2 27" monitors with no issue (This was the recommended maximum monitor size for this mount). One feature that I like with this mount is there is a metal on metal lock mechanism to adjust the mount for thicker desks. In my photo it's clamped onto maybe 1cm-2cm thickness but you can easily clamp onto a 5" desk (I have tested this). This mount will not clamp on a desk thickness of 6+" from my test.

Very easy to set up. Good quality build. Comes with table edge mount with 2 knobs and grommet mount which can take 10-50mm holes. Some screws and spacers for the monitor also included. Sturdy and easy to adjust once installed well. My 3rd NB mount. Will buy more of the same brand if needed and definitely recommend.

Great product, i bought them off a postive review and hope to do the same for someone else! Very strong arms, more than enough for my dual 21 inch monitors.

23.8インチと24インチのディスプレイで使用しています 【良いところ】 ディスプレイ2つ分の卓上スペースができる 高くできるため姿勢が良くなる 画面を遠ざけたり近づけたりできる ディスプレイの配線を隠せるので配線がキレイになる 【もう少しなところ】 関節で曲げられる向きが決まっているので、バチっと任意の位置に収めるのにはコツが必要 関節が若干固い気がする ディスプレイを遠ざけたい場合はアームを後ろの方に曲げる必要があるため、机の後ろにスペースが必要（壁にくっついていると厳しいです） 【悪いところ】 個人的には必要なかったので気にしていませんがUSBポートは穴が開いているだけです

J'étais sceptique au début a cause de certains commentaires qui disaient que ça ne tient pas en place que ça bouge, monte tout seul ou compliqué à monter. Toutes ces personnes ne sont soit pas du patiente ou alors pas du tout bricoleur (encore que c'est à la portée de tout le monde). il faut moins d'une heure en gros pour tout mettre en place. Ce qui est pratique c'est les passages de câbles qui font que tu ne vois plus vraiment de câbles trainés. Moi ça m'as beaucoup servi à ranger et faire qu'il n'y ait plus de câbles qui trainent derrière le bureau. J'ai 2 écrans de 24 pouces et ça tient niquel, aucun souci niveau poids. Ça ne bouge pas, très manipulable, on peut les déplacer dans tous les sens, les monter et descendre très facilement. Pour ceux qui n'arrivent pas à régler les bras je vous mets les photos de la vis qui vous sert au réglage. C'est grace à elle que vous pourrez faire en sorte que votre bras ne remonte plus automatiquement et reste à la position souhaites. N'hésitez pas à la régler à fond(c'est ce que j'ai fait pour plus que mes bras bouges et remonte) Elle est un peu dur a tourner la première fois donc n'hésitez pas à forcer un peu sans pour autant y aller comme un bourrin. Dernière chose j'ai pris la version sans les câbles USB 3 intégrés mais j'en ai racheté derrière car très pratique pour brancher clé usb ou disque dur externe sans avoir à aller derrière mon bureau.