Deliver to Hungary
IFor best experience Get the App
28 inch Silicone Windscreen Wiper Blade Refills, Cut to Size for Universal Replacement, for 28 inch and under (Pack of 2)
Manufacturer | Beigaon |
Brand | BEIGAON |
Model | WR-1 |
Product Dimensions | 71.12 x 0.41 x 0.64 cm; 109 g |
Item model number | WR-1 |
Exterior | Machined |
Manufacturer part number | WR-1 |
Special Features | Cut to size, Easy to install, Water repellency |
Item Weight | 109 g |
J**T
Perfect
Much cheaper then replacing the whole wiper, I will forever be using these in the future
V**E
IT’s works
A1
G**F
Received a clearly old and used and a new blade replacement in delivery
Surprisingly I received a used blade! The bag had two blades, one clearly used (dirty, worn, has a part number on one end of it and a slightly different shape!!The other blade looks like a new one. How could this happen???? Not impressed! Should be less than one star as this is fraud
S**N
Value for money
Price worthy and easy to install
M**Y
Squeaking
Only lasted 2 weeks now the right one is squeaking and both are leaving a haze.. The haze was there from day 1 but the squeaking has just started. I cleaned them and the window but made no difference. I’m going to Halfords to buy Bosch aero twin and these are going into the bin.
D**N
Leaves multiple streaks on windscreen
Very poor quality product. Would not recommend.
P**S
Good quality and easy to fit
I've had this product in use for 2 winter months and so far it works perfectly. Much cheaper than buying the complete blade and easy to fit.
H**Z
Great, but there's a catch. If you have a Honda, read below.
[10/28] I tried to use the excess from the 17" blade and replace the rear insert. The 17" is the one I pulled the second channel off, and without that, it did not work. However, using the short piece I cut off for the 26" blade, it seems like it would still be very tricky, and may not work. The CRV rear wiper has the second channel similar to what these inserts have, but the CRV second channel is a little shorter than these silicone ones. If you spent a lot of time on it, you might be able to get it to work, but if the silicone is too jammed in there, it might not flex like you need it to. (I jammed the single channel scrap in with only one metal rod, and it would not flex enough, only the center was touching the glass)I found out a few helpful things. The blades are not 26", 17" and 12", they all measure shorter. I found the model numbers, and the millimeters are listed, and when converted to inches, it confirms what I measured. If you have a 2019 CRV the part numbers for just the inserts are:76622-TDK-J02 - 650mm Front Drivers = 25.6”76632-TZ3-A03 - 425mm - Front Passenger = 16.7”76722-TRN-H01 - 300mm - Rear = 11.8”They are about $5 each online.[10/24/2022] I have a 2019 Honda CRV. it came with nice blade-style windshield wipers in the front. This means replacing the "insert" (rubber/silicone) is perfect since the frame is good. Everyone online says silicone lasts longer than rubber, and most of the amazon listings that say silicone in the title, the reviews say they are rubber. So that's how I arrived at buying these. I measured the old rubber, and they are 6mm wide (wiper inserts are usually 6, 8 and 10 mm).However, I did not measure the height. The OEM inserts have one channel to slide into the frame these silicone ones have 2 channels. You can snip the end, and the one channel will tear off cleanly. But I would not recommend it. This is where the catch is. I snipped the second channel off, and the insert is now exactly the height of the OEM one. BUT the remaining channel is not 6mm. I did not measure it, but it is slightly fatter, just enough to not go in smooth. The problem is that sliding it into the channel is a giant pain in the butt. I ended up getting it in about 4 inches, and then pulling on it so hard the end popped out of the channel, that ended up helping though, I could get a better grip on it and pulled it really hard (it was stretching 3-4" but it's silicone, it appears fine - I can say 5 stars for sturdiness since it didn’t break). I then overpulled the silicone insert (because I needed to get the end back in that I had popped out). I then pulled the insert back to the right length while guiding it into the channel. Then I cut the excess off, and stuffed the last inch into the frame. I did this on my 17" blade. My 26” frame would have been a nightmare.Next, for my 26" blade, I left the silicone insert alone, and it took about 30 seconds and I was done. So now my 26" wiper sits taller than the OEM did, the 17" sits at the same height as the OEM. The next day we got a light mist, I tried these out, there was almost no noise (barely any water, plus freshly cleaned is the perfect recipe for a squeak). Both worked fine, so the extra height probably does not matter. In a harder rain, it might make a difference, or the wear and tear might be different. So, I will update this review if I notice anything different about the two different wipers.
J**O
Works great!
Saved a ton of money by refilling my existing wiper blades with this product.
J**Y
Good Quality but won’t fit gen 5 Rav4
Good quality of material but will slide out during use on 2020 Rav4. Proper installation was verified.
J**R
Very Flexible and Smooth
These silicone wiper blade refills were easy to install and made my wipers work like new with no streaks or squeaks. To top it off they were very reasonably priced. I'll definitely be ordering these again when these wear out.
K**S
Well worth the time
The stock wipers my car came with were trash and started chopping within the year. Finding the proper fitting adapter was a pain until I stumbled upon these. Cutting and fitting was a breeze. Made it through the first rain storm and wiped like butter. Can’t speak to longevity but should these not hold up I’ll be sure to report back.
Trustpilot
1 week ago
3 weeks ago