Cablecc NGFF M.2 M-Key NVME AHCI SSD to PCI-E 3.0 16x 4X Adapter for 110mm 80mm SSD

War für ein älteres Board welches nur msata Anschluss hat. BIOS Update, und den Adapter + Crucial P3 Plus 1TB M.2 PCIe Gen4 NVMe. Im PCIe 16× slot eingebaut , geht zwar runter von 16-0-0-0 auf 8-8-0-0 aber der Verlust ist im einstelligen % Bereich. Festplatte unter Windows 10 partioniert , einfaches Volume. Läuft einwandfrei.

I'm not sure if the design was updated, but I had no issues with the two that I purchased. Each package was delivered with the carrier board itself, along with a smaller bag containing an M2 screw and a threaded retaining coupler. (See Pic #4) I tested with both a 110mm drive (Pics #2-3) and a more common 80mm drive (Pic #1) Both fit fine as long as you use the included mounting hardware.To install, slide your M.2 drive into the electrical connector, slide the middle notch of the included brass coupler into the corresponding notch on the drive at the other end (See Pic #3), and secure with the included screw from the backside of the board (See Pic #2).The standoff cannot be installed prior to the drive like many other standoffs, and does not have a second screw to secure the drive. The standoff itself retains the drive.

Tutto perfetto!

No se le puede atornillar el anclaje.

Says it supports 80mm but it doesn’t. There’s no way to remove the screw at 110mm. Using improvised bolt 80mm doesn’t even line up. DO NOT BUY wasted $$ on screws!