PERLESMITH Universal Speaker Stands for Surround Sound -Height Adjustable Extend 33.3”to 45.1”, Floor Speaker Stand for Satellite & Studio & Bookshelf Speakers up to 11LBS,1 Pair Black, PSSS2

These Perlesmith universal speaker stands are exactly what I needed. Super easy to assemble, height adjustable, and they feel really stable and well-built. The black finish looks clean and they blend nicely with my setup. Holds my surround speakers perfectly (both bookshelf and small monitors). No wobbling, and the cable management is a nice touch. Much better quality than I expected for the price. If you’re looking for reliable stands without spending a ton, these are a solid choice! 👍

First of all, they came beautifully packaged. Everything was in perfect condition. Now, the fit and finish of these stands is outstanding. The black tempered glass is absolutely beautiful. Assembly is very easy and took 5 minutes. Once together, you have a solid stand that is simply beautiful to look at. It will add to the overall appearance of your bookshelf speaker. It will then have a very classy, elegant look. The pictures here don't do them justice. You have to see them in person. I'm using them for my front speakers, Klipsch RP-160M. They're pretty big and weigh around 20lbs. each and these stands hold them with no problem. And they look great on them! This is so much better than those cheap wooden stands (MDF) made of particle board, where the holes don't always line up and you end up splitting the wood when driving the screws. With this stand, all pieces are precision and everything fits/lines up perfectly. All in all, if you want to add beauty to your media room as well as having a nice solid stand for your bookshelf speaker, this is the one to get. You will not regret it. Worth every penny. Actually, IMO, it's worth a lot more than the selling price. Thank you Perlesmith for an outstanding product!

Good and adjustable speaker stand. They work great for my application. I had my studio monitor speakers on my desk, and I always had to move up and down to get a direct stereo sound. With this stand, I dialed in the perfect height; this makes all the difference. This could be a little more sturdy, but since I set them and forget them, they are a great value for the money, overall 9/10.

Easy to put together and seems quite sturdy. Excellent for my side and rear speakers. Not too heavy but still a good fit in my Man cave. All of the parts were there. This works great for satellite and side speakers. I am replacing stands that were made of pressboard. I might but another pair and replace all four!

I really like the look of these stands. The tempered glass is nice & thick, and should be much easier to clean than MDF stands. I really like the larger floor base and speaker base. It should keep even the bigger bookshelf speakers very steady. My speakers are 7 1/8" wide x 11" deep and the placement looks really nice. Assembly was fairly straight forward. All the bits and parts were included, and everything fit together as expected. I love the larger floor spikes. Shaped well enough to keep it steady on the carpet without piercing too deep into it. I do have some complaints, none of which is worthy of a ratings ding. If I ever have to move the stands and/or replace the cables, I think I'll probably have to take it apart to get the speaker cable to thread through the bottom hole and come out the top hole. I have fairly thick, molded banana plug cables. On assembly, I ran the cable through the detached tubes before connecting them and attaching the ends to the plates. The center support rod came in two pieces, and there is a nut in the middle where the two pieces connect. I am certain the plugs will snag on that nut if I were to pull or push the cable through the assembled tube. I'd really rather not have to tug & pull to run a wire through. This is probably not an going to be an issue with thinner non-molded cables. It would have been better to have designed some form of cable management outside of the tubes. Also, the edges of the holes for the cable management are not smoothed out, so be careful about pulling cable through and rubbing on the edges. They're not super sharp, but they will scrape your cable if you pull hard and tight. Finally, here is no notch or guide (at least none that I found) that will allow you to make sure the top plate and bottom plate are correctly aligned. It may be an OCD thing to want to sides of the top & bottom plates be perfectly aligned, but most people will probably be ok with "close enough." Overall, I am very happy with these. They do the job and they look great!

Nice stand, easy to put together. Platform to hold the speaker is not the best holder but durable. Adjustable and slides by two screws on by the speaker base. Not the best but have to work for now.

I needed taller surround sound speaker stands to clear the sectional sofa in my front room. This Perlesmith stand was the only one I could find that was tall enough so despite its 11lb weight limit (my Klipsch speakers are 13.5lbs/ea) I decided to give them a try. Long story short, they work great for my needs. Assembly was very quick, easy & straightforward, no complaints about quality. Speaker clamping is uneven but I don't consider that important for my needs (although I do consider speaker clamps to be a 'must have' to prevent the speakers from being accidentally bumped off the stands). I did ensure the height locking ring was as tight as I could manage to prevent unwanted collapse and I added the same anti-tip safety strap I use on my table-mounted 100" TV to prevent an accidental bump from causing potential damage or injury. These are decent & basic speakers stands that serve well so long as you remain cognizant of their weight/tipping limitations.

These are good looking stands and were quite reasonably priced. However, they are only held together by a pair of threaded rods that run through the hollow center post and screw into the top and bottom pieces. The center post isn't really attached to anything at all, it's just held in place by the top and bottom pieces. The speakers I'm using with these stands are fairly lightweight and seem to be supported well enough for now, but if you are using heavier speakers with large magnets or active monitors with integrated amplifiers, I advise caution. As long as the stands aren't moved, this delicate arrangement of threaded rods should tend to hold, but I do worry that vibrations could work the threaded joints loose over time and cause problems. After all, these are meant to hold speakers, and speakers do vibrate. Even so I would still recommend these for setups with inexpensive speakers, where aesthetics are more of a concern than stability; if your speakers are not both inexpensive and lightweight, you may want to consider paying proportionately more for stands. Another issue I encountered with these stands is cable management. The hollow center posts could potentially have cables run through them, they do have openings at the top and bottom apparently meant for this purpose. However, there's no straightforward way to actually get cables in place; professional stands have an open channel that runs the entire length of the post so that one can easily just pull the cable through the stand. Naturally, this shortcoming can be worked around - other reviewers suggest routing the cables while assembling the stands - but it is a further indication of a product that isn't particularly well thought out. Even if you do manage to get the cable through the post, it'll still be visible at the bottom of the stand because the lower opening is above the bottom plate, rather than running through the bottom plate to the floor. Furthermore, I had hoped there would be some sort of leveling capability with the feet on these stands to help compensate for slightly uneven flooring. To be clear, this is not an advertised feature, just one I had hoped for. In fact, the feet can be individually partially unscrewed to provide a limited form of leveling capability, but then of course the same issues I've pointed out with the center threaded rods apply, vis-a-vis potentially loosening over time. Moving forward, since I already own these stands, I'll probably disassemble them at some point - before they have a chance to fall apart on their own - and apply threadlocker or PTFE tape to the threaded rods and feet to address my concerns about long term stability. I might even drill a hole through the bottom plate so that I can implement a tidy cable management solution. Until all that is done, I'll wish I'd bought better stands in the first place.

I just needed a pair of affordable speaker stands but didn't expect the quality to be this good. What a pleasant surprise!

It’s a shame I couldn’t find a good quality and strong stand locally, but I’m glad I found one. Perfect for the rear speakers of my LG Soundbar (S95QR). The tube isn't wide enough to let the power cable pass thru but still super happy with this one.

O pedestal é muito bom. Discreto, fácil de montar e atendeu às expectativas. Porém eu paguei quase o dobro de preço na taxação do produto. Algo que o vendedor não informa na pagina do mesmo.

Happy, good stands

Fit Denon bookshelf speakers perfectly