evoMx-6 Pedals 9/16'' - Black, With Replaceable Pins

Very solid pedals, wide base for my feet, great price. I use these daily on my commute in all weather conditions and they grip my shoes very well. Highly recommended if you are looking beefy pedals.

I added these to my trail bike to replace the resin pedals which were starting to fall apart. They're definitely longer lasting and feel good. The only complaint I have is I wish they had added pins to the middle of the pedal instead of just on the outsides. My friend's bike has middle pins and it feels better and much grippier. Other than that, they're excellent pedals.

What lousy product this is. The bearings in both pedals are bumpy, and the roughness can be felt easily by slowly turning either pedal. The balls in the bearings have flats on them and/or the races are malformed. There is so much friction in the bearings that they make an abnormal bearing noise when either pedal is spun. Each pedal is equally as bad. I recommend not buying this product for any application.For your reference, these pedals were made in Taiwan by "Cycles Lambert Inc.". The product ID is 450054-01.

An ok peddle for the price. If you want professional pedals buy them. These are just decent run of the mill flats. They will do the job. Good traction

These pedals worked very well and have excellent traction. It is an excellent pedal for anyone who has wide feet.

For the price, can't go wrong. I've definitely gotten my money's worth, and they work great. I've had them about 2 years and noticed some grinding sound and play when spinning them, so I decided to repack the bearings. The cap is a pain to get out, and you'll need a fish hook or something small and sharp to stab it and pull it off. It uses an cup and cone adjustment, so nothing too fancy or difficult. First thing I found out, tons of tiny little 1/16" bearings (maybe smaller) inside this pedal. About 30 per pedal. Very easy to loose a couple, so take it apart over a small container. There was originally an o-ring on the back of the pedal, but both of mine were missing. I remember an o-ring stucking out of the pedal after my 2nd or 3rd ride, so these have been going strong for at least 2 years without any seals. Bearings and races cleaned up nice though. The replacement o-ring I used was a standard kitchen sink o-ring #9, 5/8" x 7/16". the actual measurements on the pedal were 11/16 and 1/2", but I wanted the o-ring to stay firmly attached to the axle and spin in the pedal. Didn't want to risk the o-ring bunching up and getting pulled out again because it was too big. After assembly, smooth with no drag. Only problem I had, other than keeping track of the bearings, was adjusting the bearing pre-load cone and lock nut. Difficult to get it set and locked right. I'll probably go back into the pedal and use some locktite.

nice pedals for the money. Large platform, feet stay glued to the pedals. Put a set on my mountain bike. Would highly reccomend this product.

I have a Cannondale Quick CX5 hybrid and my plastic OEM pedal cracked. I was in need of new pedals, ordered these, and have been very happy with them. They are certainly much heavier than my OEM plastic pedals, but they are also alloy and much sturdier. I could have paid 3 times this amount for a lighter pedal, but this seemed sufficient for my use.

Awesome Pedal for the price.