UltraProZ-Wave Smart Light Dimmer with QuickFit & SimpleWire, 3-Way Ready, Works with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White Paddle, 2-Pack, Smart Switch, 54897

I wanted to update and upgrade my alarm system and home automation. Found these and they are much more reasonable in price then what the alarm companies are selling or recommending. My only grip was when you have to do a 3-way set up, you still need 2 switches to do it. Some other manufacturers allow you to use a standard paddle switch and just have one z-wave switch. Not a big deal, but a way of giving the consumer more bang for the buck.I ended up replacing 14 switches throughout the house. The Qyolsys Panel 4 learned all of them without a hiccup! Everything is working flawlessly through the app and manually. I like that the blue light can be programmed to be on when the switch is not in use and works as a night indicator at the same time. They look great, even when located next to a standard paddle switch.If you are comfortable installing or changing out an electrical switch, you'll find these a breeze. One thing that stood out is the double inlets for each wire. It really makes it easy when doing multiple switches next to one another. You can bring the wire into the first inlet and use the second one as an outlet to feed the switch next to it.I would recommend these to anyone wanting to get into home automation! Hope to see some z-wave wall outlets in the future as well!

This switch is the latest branding of one of the most common Z-Wave light switches made. Over the last 5 years, it's been sold under the Jasco, Enbrighten, UltraPro, GE, and Honeywell brands. I've replaced most of the main light switches in my house with these Z-Wave switches, and this is very similar to all of them.Installation was pretty straightforward. It does require a neutral wire, but the wire is included and only added a couple extra minutes to the installation. Adding it to my Z-Wave network was straightforward, and Home Assistant had no problems recognizing them. Note that these are dimmers, and will fade the light on and off instead of switching it directly from 0 to 100%.I expect these to be fairly reliable as the other brands of the same switch. Of the 20-ish that I've installed over the last 5 years, I've only had 1 fail and have to be replaced. I would recommend this switch for anyone using Z-Wave.

I used this with Home Assistant -> Was able to pair it without any problems. Details how it works:1. If you set it to a switch mode, it will turn the light fully on and off very fast after pressing the button on the switch, but you can still change the brightness from Home Assistant, so you can have a mix where the lights turn on instantly (rather than slowly get brighter).2. The switch has an option if it should dim fast or slowly -> the fast option is still too slow for me... Upgrade idea: Just add a numeric field that will be multiplied by 100ms to get the dimming speed (so value of 10 == 1 sec on/off time or something like this).3. But the switch listens to the "transition time" parameter from home assistant, so you can still modify this and have it dim fast or slow, depending on automation.4. It has the option to turn the indicator light always off or always on.5. It supports events:- key press/key release (so you can make automations based on how long & which key was pressed)- double press (on each on and off button)- triple press (on each on and off button)So it can be used to also control other lights or enter some scenes or even to control smart blinds if needed.6. Doesn't buzz with the fixtures/light bulbs in my house. I tested it with Philips LED bulbs (older CREE bulbs that I had were buzzing a little still).The bad:1. The default network leave sequence is: triple press on + triple press off: But this is the problem, both triple presses can mean something, so if you triple press to turn an extra lamp on and try to turn it on and off you might accidentally leave the Z-Wave network...2. Like for most Z-Wave products, the price is a little higher than I would wish, especially comparing with existing WiFi and ZigBee products on the market. But honestly the reliability and speed and lack of WiFi congestion issues still made me try to switch my house to Z-Wave and so far I'm going forward.

I have used this brand/model of switches a few times in my house and have had great luck. Once installed it’s fairly easy to pair. Just start inclusion mode and tap up or down. If you don’t see the switch being included. Then start exclusion mode and tap the up or down once. The try again.Setup is easy if you have a neutral wire already (you’ll typically see a bundle of white wires in the dumb switch box that don’t connect to anything).This switch is the main switch if you are doing a 3-way etc. you’ll need the dimmer add-on switch to do that setup. Be sure it says Add-On or auxiliary. I only tried with this same brand and it worked. You may have luck with the GE Enbrighten as I think that they are both made by Jasco.Special note about LED compatibility and these smart switches:You need X amount of watts on your circuit. I think it’s 25W-35W? So not all LEDs will work well with this setup because there’s not enough power.Second, LED dimming is different than incandescent dimming. It’s due to the electronic component differences. So not all LED designs are compatible with this switch. I think I did see on another review that this is a TRIAC dimmer. You’ll see a flicker at all ranges of dimming if this is your issue. If you see a flicker only near the max or min of dimming, you can adjust the switch’s max and min to not reach the flicker stage.Between those two issues, I was unable to use this model pairing on my retrofit Halo lights 4-in 60-Watt Equivalent White Round Dimmable Recessed Downlight (RA404930WHR). I will need to use them elsewhere in the house since I bought then so long ago. For those lights I bought Inovelli’s dimmer switch and it works well. However, The Honeywell add-on dimmer switch did not work for me with my Inovelli dimmer with my LED setup.

J'adore ce dimmer.

Funciona sin problemas con Hubitat Elevation, muy confiable y llegó antes de tiempo. Ya configuré incluso el doble click arriba y abajo con escenas para "trabajar desde casa"

No surprise, both being made by Jasco, that this switch is pretty much identical to the GE Enbrighten dimmer. Works as expected!

This was so easy to hook up as it detected the traveller automatically one a 3way no other smart switch has worked. Connected this one to Home assistant so basement lights come on when motion is detected.Used the second to add a dimmer to the foyer light and connected it to Alarm.com so when the door opens in the evening the light comes on for 5 min.

Total waste of money. Was using GE Zwave switches and they die within a year so tried this brand. Did not even work once. Went into the garbage. Switch was stuck in rapid toggle on and off.