dephen 5V USB LED Light Strip 4.9ft, 4000K Daylight Under Cabinet Lighting

Used for lighting 3D print project Dr Who TARDIS windows and top sign backlighting. A) they measure and work as advertised. Measures about 1.8mm height. B) love the . 49" cut spacing vs others at 1.5" C) soldering leads to pads after cutting was easy with a little practice. D) tried resistor and buck converter to lower brightness to reduce heat at lights. Worked great. E) strip length was right, BUT both units I got had been soldered in multiple places, as if from scrap strips. Joints soldered WELL, but I don't like the adhesive backing being the only thing holding segments together in many places. I think other sellers will have same thing though. F) adhesive backing holds VERY well. I had to remove a strip from model. It readhered well enough that I was surprised. G) if you will be enclosing them there by trapping the heat, definitely use reduced voltage. 3v still plenty enough bright, but no significant heat buildup. All the other comparable brands with similar specs to this COB strip have the same power consumption at rated voltage. After using 2, I ordered the Pautix 2m strip in a warmer 3000k light. An extra . 5m for a dollar more. No hesitation recommending these to a DIYer

I bought this strip to use in place of a neopixel skinny strip for my 3d printed Dark Saber, since I only wanted white. I chose it since the strip is cheap and appeared as continuous as possible. I had no expectations, and was hoping for just an average LED strip that would have the power to at least light up the blade. After I connected this strip, I was left in a bear catatonic state of slack jawed amazement. These were beyond bright... and I know what I am talking about. My apartment is one of those places that you would swear shares space with a black hole. No matter how many lights, it is always dim and just not bright enough. I have gone through tons of LED strips, COB's, Smart Bulbs, and etc. This strip is literally one of the brightest non-bulb lights I have used. Well, I have had others a bit brighter, but they didn't light up the room like this one does. You can see the picture of teh strip, and that is only half a strip.. my Pixel4A camera through a fit about the brightness :) With a price of $10, you can't non try it out. The only negative I have seen, is that I ordered a 4000K cool LED strip, since warm just wouldn't match the Dark Saber, but this is very very warm. So keep that in mind, these run on the hot side of the spectrum.

Exactly what I needed. I can easily plug or unplug it from the USB port on my 3d printer to get a better view. Good adhesive, easy to cut to size, and very bright. Its also a nice bright white without too much blue light. I've had a problem in the past with cheap led lights having a blue tint when they are advertised as daylight or white. Also good to note that all the pictures were taken with no other light sources in the room turned on.

This is a good product all around. Adhesion to the back of my TV for the four of the strips that I buy it has worked and continues to stack. They don’t get hot. However they’re not as bright as the manufacture would suggest

I used some of this strip for a lighting bar on my 3d printer (I still have about two feet left). this gave me plenty of light in my print area. The best features of this LED strip is 1, you can cut them to length 2, they run off a simple two wire low voltage (5v) system. This allows you to cut the strip to fit whatever length you need, and solder jumper wires to connect different strips or another power connector. The lights are bright white (not all colors for white, like the multicolored LEDs). I have mine attached to the light bar with the adhesive backing they came with, and I’ve had no problems with them coming loose.

These little 5V strips are amazing for the amount of light that they produce. I use them to underlight a loft and 2 of them is all I need to outshine a role of 30ft of SMD5050 LEDs. I also love how flexible they are. They have a lot of applications for illuminating clothing, area lights, or costume lighting. The only issue is that, when paired with a dimmer, I can hear them squeal a bit and I don't know if that's the dimmer or the LEDs. I'm assuming dimmer. And, being 5V, you can power them off of any power bank. I've used these lights to illuminate camp sites at night of a 10,000 mAh powerbank. It will also be hard to find a longer, brighter, cheaper LED wand for light painting (duct tape a role of these lights to a ski stick) if you are into that, in which case you will definitely want to also invest in a USB extension dimmer switch. I've been using several of these LED strips for several months now and they are still going strong.

These are great low power strip lights! , I use them with a power bank for quick portable light as the strip can be stored easly (I wrap it around the power bank which is a size of a credit card 💳! ), I don't usually remove backing on the adhesive, I use other mounting techniques, but it does seem like it would stick on the proper surface with no issues! They could be a little longer, but they work well for my purposes!

I have purchased these for three different projects. The first was for a leg lamp to make it shine in all its glory. Worked perfect! Second arrived with the first section bad. If I moved it a little it would go on and off. Since I had already cut it to fit where I wanted to I figured I might as well try and fix it myself. Cut off the first section and re-soldered it back on. I’m using it for a custom under hood light powered by a Milwaukee M12 battery. The third string is for my tool chest and it works great. With a USB port already in the chest, it turns on whenever I flick the power switch for the outlets to work. I didn’t want them on whenever I had the power strip on so I ordered a usb switch and it works great now. With my garage lights off, in complete darkness, there is now plenty of light. Overall, I am really happy with the lights. The brightness is good, the color is good and the double stick tape is strong. Be careful when you pull the back off. I accidentally pulled one off from the wrong side and took the entire strip with the backing still there! Since it is so sticky, I was able to reapply it to the strip and was goo to go!

Creo que los LED COB sin lugar a dudas ofrecen una iluminacion superior debido a que tienen mas led por mm PERO es bastante costoso, aun asi, vale la pena, aunque tambien otro pero es que, quizas la luz blanca no sea tan blanca como esperaba, tiene un tono un poco mas calido que hasta pienso que me mandaron la version equivocada, pero aun asi, valen la pena! Ademas si viene con pegamento 3M original, cosa distinta a las chinas, que tiene 3W que ni pega.

لون الاضاءه جميل ولكن قصيره جدا ويفي بالغرض

Bought these for under my kitchen cabinets however our ten daughter found them before i got around to putting them up. They look great in her room. They are still sticking well to the wall

This item isn’t bright at all and the adhesive isn’t strong

I ordered 4000K and the color to my eye is very natural looking. Slightly muted from bright white but not overly yellow. I would put the color in between the light from incandescent and fluorescent lights. For my application there was quite a bit of soldering strips together using wires. I found that I just needed to gently rub the contact surfaces with a pair of tweezers to get solder to tack. This really helped with not needing to clean up rosin afterward since rosin wasn't needed. Definitely found this little bit of scrapping prep made a big difference in getting the solder to stick quickly to the strip.