DOME GLASSWhitestone Screen Protector for Galaxy Z fold 2, Full Tempered Glass Shield with Liquid Dispersion Tech [Easy to Install Kit] - One Pack

So i was a little sceptical after reading so many reviews that said the install process screwed people but i read 1 that said as long as u can follow directions it is simple and another that said the adhesive didnt go all the way to the edges but he used a little from the second bottle of adhesive and it worked fine. So i decided to try it. The thing that seemed a little confusing to me was attaching the black film to the edge of the bottom jig after ur phone is in the jig i took it off of the blue pieces then realized i needed to take off the blue piece on the bottom of the strip and leave the blue piece with the notches intacted so it would attach to the jig and the bottom side of the strip sticks to ur phone so that when the adhesive is spreading it doesn't just spread out the side into the bottom of the jig. Then because of what i read i started with the little from the second bottle of adhesive but when i tried to remove the pin so the glass would fall onto the screen it pulled the hole top jig and that pulled the glass totally messing up everything but since i didn't have a full adhesive anymore i tried to fix it and continue with what i had. That didnt work because when i put the glass back down it had a buuunch of bubbles under it. Finally i decided i would have to start over and hope i could make the partial tube i had work. Quick tip u can tap the top end of the adhesive tube and get a few more drops from it. So i cleaned everything with kleenex and then alcohol prep pads and dryed with the cloth provided. Then started over and made sure i had a firm grip on the top jig anytime i did anything with it. The adhesive didnt go all the way to the bottom edge or the top edge of the screen so i set up the uv lamp and used a hotel key card (im sure u can use any credit card or other card that is plastic and sturdy) and i pushed adhesive from the middle of the screen until it filled the edge and i still had some visible screen in front of where the card was and used the uv to cure it for a few seconds abd it worked so i did the other side then just cured it the way the instructions say to and as u can see from the picture it turned out greeaatt.Ok this was long but its the first review i have ever written and i hope it helps someone make their screen look as awesome as mine does. Thanks for reading

This appears to be a great screen protector, but the installation is a huge headache. After trying to get the adhesive to spread evenly and then finally not having anymore adhesive to try to apply screen protector again. I just gave up and threw this product in the trash. A screen protector shouldnt require an application degree to apply. Should be simple! This screen protector came with an apparatus that looks like an actual screen protector itself and a uv device that you have to plug up an apply. If you are looking for a simple screen protector that's easy to apply. This definitely isn't what you are looking for. This product is the worse, it may protect your screen. But can you apply it without damaging it or running out of adhesive is the question.

I was very skeptical after reading some of the reviews about not having enough adhesive but I decided to give it a try and I'm so glad I did. I thought "well, there is a second tube of adhesive in the package, so it might be worth trying". I didn't need the second tube. I watched a you tube video before I started, followed it step by step, and it worked perfectly. I believe the people who have left poor reviews about "not enough adhesive" may have skipped a step because after installing it, I can see where one simple step would keep the adhesive from spreading to the bottom. First, you have to be working on a flat, even surface. The frame is designed to lay flat but also will tilt down when you push on it. If you use the application guard like you are suppose to (included at the bottom of the frame and it's kind of hidden), the adhesive pours on to the top portion of the phone. Before you apply the glass, you have to push down on the frame (at the bottom) and allow the adhesive to move to the center of the phone (it will be in the shape of a bubble). Once it reaches the center, release the frame so it lays flat. If this step is omitted, there is too much distance for the bubble of adhesive to travel and it will not reach the bottom. I am extremely happy with this product. I have purchased cheaper products that claim "easy installation" but there were two problems. One, I had to push hard on my screen to get it to recognize my finger pushing on the icon and by doing that, the protector would Crack. Two, the protector would only stay on for a couple of days and then fall off. This product is what they claim. You barely have to tap the screen (normal pressure) to use your phone, it is more "fingerprint proof" than any product I've used (no glass is 100% fingerprint proof), and if the installation instructions are followed 100%, it looks and operates as part of the phone. Since I've spent more than $100 buying other products that don't work, and have spent a big chunk for this phone, this is well worth the money for screen protection!

The screen proctor isn't 100% coverage. It has about a 2mm gap on all sides. When you are doing the install, make sure to align the camera hole before you cure the glue, my mistake was trusting the jig completely. MAKE sure when you are taping down the phone make sure the tape covers the earpiece, I can see where the glue can run in and pretty much break the phone. If the glue seeps out from the side, it's OK, wait for it to dry and wipe it off with a dry cloth it's easy.

Basically they provide a " glue" to adhere the tempered glass to your existing phone screen - complex and difficult to install - ended up throwing it away. Not worth the money - rather buy a standard tempered glass

Came off trying to put the case. Does not fit with slim armor pro by spigen almost destroyed my case by losening it had to take it off. If it comes off by accident you cannot put it back. You can try to clean the glue carefully and use the spare glue to put again. However not worth this much money

Impossible to instal. Easy broken during installation. Don’t buy it.

Understand the concept, although my holding case doesn't close properly, also a touch more glue in the tube would have been nice