Orzero (2 Sets) Compatible for Samsung Galaxy Z Fold 2 5G, 2 Pack TPU Front Screen Protector and 2 Pack Inner Screen Protector High Definition Bubble-Free (Not for Z Fold 3 2021)

Let me start off by saying this screen protector is much better than the stock one from Samsung, it feels smoother, looks clearer, and doesn't catch finger prints even a fraction as much as the stock. That being said, its is nearly impossible to get on perfectly. I tried 4 times, the first two times were messed up in my opinion due to the instructions they provide, but luckily they are responsive and helped me out by replacing the kit, so points to them for that. Ill give you my instructions here so you can learn from my mistakes. The third time was almost perfect, but I went too slow and messed it up. 4th try isn't perfect, I messed it up and slightly gouged the protector trying to get the bubbles out, but you cant tell when the screen is on, so ill take it. It still looks better than the original even with that. Now, here is detailed instructions on how you should get this thing on, based off me trying 4 times.Step 1:Clean the screen, use the alcohol wipes and duster stickers included and get it spotless, and I mean absolutely spotless. do it under bright lights and look the screen over until every spec is gone. DO NOT use the included microfiber cloths, they are junk. hold them up to a light and rub them between your fingers and you'll see why, they shed fibers, and these will mess up your install. get yourself a quality microfiber cloth and some canned air, and get the screen clean. I can not stress enough how important it is to take your time here, as not getting all oil and dust off is going to mess up your install.step 2:remove the layer labeled 1 from the protector, line it up and place it down. Don't worry to much at this step, this layer is just here to help line it up. use this layer as an opportunity to check for fibers and dust you might have missed, squeegee out the bubbles and lay it down just like the actual protector, if you see debris on the screen now you still have time to get them off. Make sure its lined up perfectly here, there wont be any moving it once you go to step 3step 3:Now here is the hard part, read through this before you try it, as you've only got one shot here and you've got to be quick, going too slow opens up room for errors or for dust to get in. The screen protector is split into two parts, layer 1 and layer 2 (they are labelled on the side), you'll see the crease horizontal in the middle. Lift up the protector, and check for dust one more time. once you are ready, have the squeegee ready, and remove layer two carefully, do not touch the back of the protector once you've removed layer 2, it will leave finger prints under the screen and look bad. Now start from the middle and press upwards toward the top of the screen in one quick swoop. make sure to get it all pressed down as best as possible. You'll probably have bubbles at this point that wont come out, just leave them. they will more than likely come out after a few days, but continually prodding at them will mess up the screen protector.step 4:pretty much the same as step 3 but on the bottom.you should have a pretty clean install now. More than likely, you'll have bubbles, but again they will probably come out after a few days, mine did. Honestly, I would just go to a pro and have them install it if you can. These things are incredibly hard to do yourself, but they can be done. Overall I'm happy with it, even with the flaws it is still better than the stock protector, and way better than risking running it bare. This company backs their products, so i trust that it will be good for my phone in the long run.

Easy to install, no bubbles, smooth touch feels like there is no protection on at all great!!!!

I followed the instructions as stated and the first set of screen protectors didn't come out to great. Came out with a bunch of bubbles and the microfiber cloth they gave you breaks up if u rub to hard leaving fabric behind. So make sure you have a good piece of microfiber on hand. I gave up and yanked them out and used the second set. I used a softer scraper for the inside screen since I was worried the screen is fragile. Still even being careful and made sure there wasn't a spec of dust , bunch of bubbles even a weird smear underneath it. But I had no choice and I left it on. I ordered another set to try again. As the days went on I noticed the bubbles were disappearing and working its way out. It does say 2 days. But mine took more like 4 days to completely flatten out. Now it looks flawless. I didnt bother using the new set I ordered.Its a much better screen protector than the one that comes with the phone. It leaves less fingerprints and doesn't have that rubbery feel. Finger glides much smoother on the screen now. So far I'm happy with it, my only complaint is that microfiber that comes with the kit. Its terrible.

I am not good at these nor ever have been, I've gone as far as paying someone to do it for me. This was the first real try I put into a screen protector. The instructions on the cover missed steps while the card they give you with the set are more accurate. I read everything on the front and read the card later after I had applied the first 2 on the front. The first one I had bubbles big time, I account that to user error and that's why the 2 set purchase worked out IMO, especially for the price. The second one came out perfect...minus one major thing. The center horizontal crease. I have a nice line there now, but only noticeable when on a white screen and not by much. Since I applied less than an hr from when I'm writing this, I will give it a few days to see if something happens. The key to preventing this is to read the card and see that you have to pull the protector back a little before applying the second half. Since this is partially user error again, I only took one star away since the 2 sets of instructions weren't the same; one had more information on it than the other. Overall though, the protector is fine. It does exactly what I want it to do and its very clear. I'm still happy I replaced it and I'd do it again to get that crease out. I am concerned of the curved edge on the right side of screen but so far its holding up, so it may just be paranoia.Edit (Oct. 29th): The screen protector has held up very well. The side adhesive for the curved area has stayed very nicely. The night I received it, I kept rolling it on the curve to make sure it would stay as best as possible. It is a fingerprint magnet, but I expect that out of most things these days, I'd give this a 4.3 out of 5 if I could rate it in those terms. There was a case put on today and it did not cause any issues. I would recommend this product

This screen protector is easy to install, however it doesn't last long before it starts to split down the center where the phone (Zfold) closes. It came packed 2 and I received them on Feb 7, 2023. It is now April 11, 2023 and the second one has already started to split. I wouldn't recommend this for any type of long term protection.

Muy buen producto quedo perfecto y sin burbujas muy fácil la instalación recomiendo mucho el producto

I normally don't write reviews, but given how well this worked out, I felt I had to this time. I have a Fold2 and after a while the original screen protector started bubbling up in the middle so I thought I'd try this product and replace the original screen protector. It wasn't the easiest thing to put this product on and I was pretty careful trying to do it following the instructions on the video on youtube they provide a QR code link to.Anyway, I managed to get it on and I was initially disappointed because of the several little bubbles that I couldn't seem to remove after I put it on. To my surprise, about 24 hours later, ALL the bubbles were gone! Its now perfect and I couldn't be happier! I would definitely purchase this product again if I need it.

So happy with this protector. Feels way better than the original from Samsung and was easy to put on. Watch the video, read the instructions and take your time. One thing I did was cut the squeegy down to fit the screen better and I think it helped a lot with the application.

Excelente le quedaron muy bien a mi samsung, su video instructivo muy fácil de seguir 👍

Installation instructions were clear, installed and had numerous bubbles that I weren't sure would go away. Within 3 days or less all of the bubbles disappeared! And it looks great! I'm by no means a pro, only have installed screen protectors on iPhones, a few Samsung slab phones and my iPad pro 12.9". Much better than the Samsung supplied screen protector that was originally on the fold!