The Tile Doctor Starlike EVO - Litokol Epoxy Grout for Tile, Ideal for Home Office Decor & Bathroom Tile, Glitter Paint Room Decoration - 100 Bianco Assoluto Classic Collection 2.5 kg - 5.5 lbs

I found dividing the product into quarters and applying with automotive bondo spreader worked best. Do your best to minimize the epoxy on the tile. Wait 24 hours, then scrape with a razor blade and mist with a spray bottle filled with Dawn and water and work with a coarse scotchbrite pad. Wipe with a clean towel immediately after. It’s a lot of work, but when you’re done, it looks great and will last for a really long time

This stuff applies way better than the kerapoxy cq we used for the first bathroom. The grout sand in this is fine compared to the coarse sand in the kerapoxy. There was enough liquid hardener (5.5 oz) to measure out on a scale in a cup and divide it into 2 batches keeping the ratios perfect. Follow the instructions exactly! they like it to go on with the tile dry. It took 2 ea 5.5 lb containers to do our tub of 32 x 60 x 80" high using 4 1/2 x 10" tiles with a 1/8 space. They say work time is an hour but I divided it because I'm slow and I probably didn't need to. It wasnt hard after sitting for an hour but it was rock hard the next day. Cleanup was great. No haze after first rubdown and 2 washes. Did 3 washes but probably didnt need to. Clean water makes it nice. I also noticed that it was well packed and the containers were undamaged. There is a plastic divider between the bag of hardener and the hardener was in a tough plastic bag

This is super water repellent and that's great. We wish we had purchased the non-sanded grout from this company instead, because we had to razor off the sandy stuff even after all the precautions we followed. The fact that we could still do that after it dried was amazing.The directions are specific which was great but intimidating that we would do something wrong and'yellow' our grout. Didn't happen, but this was super messy, and challenging to apply.We used way to much material at first.It was critical to finger depress between the white beveled tile we used, (gloves on yes!) to get this to not fill in large spaces instead of the small we were looking for.We put a long skinny tile behind the sink to stop mold issues on our butcherblock counter top which worked very well only because this grout is super water repellent and easy clean. Tough to apply but worth it in the end.

This can be used over existing grout. It is more work, but worth it! It's stickier than traditional grout so you should be careful to not get it on tile or clean tiles more during the process.

Followed some advice about sealing pebble stone since epoxy grout will discolor the stone. I applied 511 Impregnator Sealer to white pebble stone and waited 24 hours before grouting which was also white. All stones turned brown, and yellow and beige with Starlike and along with an additive... after a few days, decided I couldn't live with it and have since dug it all up and still in the process of starting over. Expensive lesson and mystery.

High quality Italian epoxy grout that applies easily and looks fantastic. My shower floor looks brand new. Follow the instructions, and you’ll love the results. DIY is so cool. Highly recommended.

This epoxy grout almost had me in tears, and I'm a "guys guy" type of dude. Bought this to re-grout my pool tile. It stated 60 minute minimum working time. Ok great. WRONG! The first 10 minutes was great. Then, BAM! It got SO sticky, my wet sponge wouldn't come clean and I'm just smearing the stuff all over the tile & pebble finish trying to wipe it clean. I got about 1/10 of the pool grout joints done before 90% of the bucket became JUNK and a waste of $70, PLUS it destroyed a $20 epoxy grout float, $8 drill mixer and my wife's mob bucket that I was using for sponge water. You can't clean this crap off anything! I've soaked my hands in acetone and mineral spirits and they're STILL white & sticky!!! PLEASE DON'T BUY THIS unless you can use it all in 10 minutes or less!!! How the hell did this product ever make it to market???

I watched several Youtube videos about grouting a shower floor with an epoxy grout and was a little apprehensive going in this direction, but the official Starlike Youtube video convinced me this product was easier to work with than most other epoxy grouts. Overall, the product mixed easily by hand, applied and cleaned easily, and I didn't run into the issue of it hardening too quickly. I originally purchased a 5 pound tub thinking that would be enough for a roughly 16 Sq. Ft. shower floor, but had to purchase a second tub to finish the job - which was for 1 inch "penny" tiles. So about $150 to grout a fairly small shower floor, but I think it was well worth the price given the end-result and ease of use. I purchased the "Bianco Assoluto" which is basically a plain white grout without the glitter additive and it looks fine.