CYA Supply Co. Base IWB Concealed Carry Holster Veteran Owned Made in USA - Fits

The media could not be loaded.  This is a good holster. I’m one of those guys that usually buys 2 or 3 holsters for every gun I own before I find one that I like and use. This holster tightly holds my Glock 26 and it is comfortable to wear. The clip that fits over your belt is strong and latches on your belt securely.I like that the holster has an adjustable cant. I prefer to have the grip of my pistol to be elevated above my belt line. The holster also has an adjustable tension to hold your pistol securely in the holster. There are two adjustment screws and the tension can actually be too tight. My only dislike of the holster is that it came with the tension was set to tight and immediately scratched the trigger guard of my new Glock 26.The surface of the holster that faces your body extends as high as the pistol of the gun does so the gun does not rest on your skin. The holster stays open and is it easy to reinsert the gun back into the holster after it is drawn.The gun securely latches in the holster and with proper adjustment it is held in place and it does not easily come unholstered. Make sure that you set it to your personal setting that you are comfortable with. Mine is set to allow a snap draw and the holster stays attached to my belt.The holster fits nicely and it is reasonably comfortable to wear. You can also wear it with limited printing while wearing a loose fitting T-shirt in the summer.I rated it at 5 stars and I hope my video is helpful for you.

I hadn't heard of CYA Holsters but the reviews on Amazon were great so I bought one. It fits my S&W M&P Shield 9mm perfectly and is is a very high quality holster. It has two adjustable screws so you can set the retention to your liking. It definitely has a nice solid click when you place the gun in the holster, it's very secure. You can also adjust the cant if you like, the factory setting was perfect for me. The belt clip is nice and wide so I haven't had any issues with the holster moving around on me. Obviously just like with any holster, you want to use a good quality gun belt. I'm very pleased with the quality of this holster, you can just tell it's a well made piece. I'll try and give an update in a few months to see how it's holding up, I don't anticipate any issues though.

**SEE 2 YEAR UPDATE AT THE BOTTOM**Let me just start by saying that I have been VERY pleased with this M&P Shield IWB Holster from CYA Supply Co. so far. The Shield has been on my "list" for quite a long time now and while I was looking for a decent carry holster, this product came up. After seeing all of the great reviews and seeing the price (under $40), I knew I would have to give this a shot once I got the Shield. Well, I purchased a 9mm Shield a couple weeks ago, so I put the order in for this holster this last Saturday afternoon and I already received it today (Tuesday, 3 days later). The packaging was simple and the holster came with an Allen wrench (looks to be a 3/32") to fit the retention and cant adjustments.The holster itself is very light and appears to be made of a durable plastic (see product description for exact type) that appears very durable yet flexible. I have been wearing it for the last couple of hours with zero irritation on my skin, so I am very excited to begin using it as my EDC. The clip that comes standard will fit a 1 1/2" belt, with a possible belt thickness of 1/4" (my belt is not this thick so I cannot say for certain that it will fit one this thick) I really like how CYA has incorporated the ability to adjust both the retention and cant for this holster, making this a very valuable product to those that have not found a holster to meet your carry style.For those that may not know, the retention adjustment allows you to customize the grip (retention) that the holster places on your M&P Shield as it is holstered to allow for a tighter or looser drawing of the weapon. The cant adjustment allows you to customize the angle that your M&P Shield is placed in your waistband from 0 degrees (barrel pointed straight down for a straight up draw) to 15 degrees (barrel is pointed slightly back and the grip angled forward slightly for an angled draw).Pros:-Cheap price for a great quality holster-Material is light, but also appears durable-A thin holster for a thin gun (measured at about 1 3/4" at the thickest point, including the clip)-Excellent shipping (purchased on Saturday, arrived Tuesday in Colorado)-Comes with adjustment Allen wrench needed for all adjustments-Ability to customize retention, as well as cant angle (from 0-15 degrees)-The fact that it is made in the USA by a veteran-owned company makes this product that much more awesome to meCons:-This is not really a con, but since the clip is made from plastic and not metal like I have traditionally seen, this may end up being a problem point. It is made from the same material as the rest of the holster, with metal screws, so provided that the holster itself holds up as well as I think it will, then I guess the clip will not be an issue. Just figured I'd mention it for those wondering.Overall, I am highly impressed. From what I have seen so far, I would 100% recommend this to anybody looking for a Shield holster. I will be updating my review after I have carried my M&P Shield in this holster for a while.**UPDATE** 09-Apr-18 (Purchased 25-Jun-16)I have had this holster now for nearly two years and it fits just as well as it did when I first got it. I have not had to tighten or adjust the screws at all since I first got them how I liked them, which is very important for me to not have to worry about anything coming loose while carrying. I have not noticed any wear in the material or finish, although I wear this as my EDC. I have not had any issues with skin irritation from rubbing and sweating, so all in all still very impressed! My ONE big takeaway point is to be sure that you use a quality belt, something with some thickness. I started carrying while wearing a thin (like less than 1/8" nylon webbing) belt, but this would move out of place and once or twice fully slip off. After I bought a 1-1/2" wide (1/4" thick) leather CCW belt from Relentless Tactical, I have not had any issues with this holster moving or coming off. Like a few other reviews I saw before I made the purchase stated, A GOOD GUN BELT IS A MUST, not just for this holster but for all holsters in general.I am still highly recommending this holster for the M&P Shield after 2 Years of use!

Fantastic holster. I absolutely love this product. It fits the G43 like a dream. Unlike many kydex holsters out there, you don't have to jerk the gun out of the holster. The adjustable tension screws allow for user preference. The gun draws smooth and easily while maintaining adequate retention. The clip is sturdy, yet allows you to easily take on and off your belt, which is perfect for someone with a busy life who takes their gun on and off throughout the day. I live in SoCal and even in the hot, sweaty, 110 degree summer months, this holster remains comfortable, even on bare skin under a basic T-shirt. The ONLY gripe I have for this holster is that the body protrudes slightly past the curvature of the trigger guard. This causes the holster to rub your finger when drawing with a good grip purchase. It came become a little annoying when drawing several times in a row at the range. However, a slight relief cut with a Dremel fixes the problem (see pictures) and the material smooths back out very nicely with fine sand paper. After the slight adjustment, this is my new favorite holster. The Gasden is also a cool touch. Can't beat the price, and I especially love a veteran owned company and a product made in the USA. Five stars.