CKPSMS brand - 1SET #KP-123 Sewing Machine Double Fold Clean Finish Top & Bottom Binding Binder Attachment (Tape Size 1"=26MM)

Works just like it says, just cut the strip according to the size indicated. Threading it through is the most difficult thing but once you get the hang of it, it works like a charm, I used my awl to start it. The stitching line is adjustable, it comes with screws to attach to your machine. You just adjust the alignment, sew slow for control. I am very happy for my purchase.

The media could not be loaded. I have a juki Tl 18qvp. It fits perfect for the machine.I got it today and tested it out. Definitely have to cut your material on the bias (45 degree angle) for it to work properly. If you cut straight away instead of on the bias it creates puckers and doesn’t fold right. (Depending on the material.)The second photo is the back of the binding. The top is the first try and the second is second go around. I slid the binding foot which gave better results.The first photo is what the front of the binding would look.I gave it four stars because I do wish the foot fed through a little more evenly. But it definitely make my job easier. I did buy the 1 1/4” foot with this one so I might buy and even small size binder attachment to make thin spaghetti strap dresses.Side note The shipping was really fast as well.Edit: This is also my first time using a binder foot for a sewing machine. In my opinion it’s quite simple and easy to setup. Even without instructions.Edit: so i finally was able to use the .32mm binder foot and it is amazing. (See the photos/video of the red straps)As someone who runs a Made to order clothing business this helps a lot because I want my items to look as neat and as clean finished as possible.I didn’t cut the strips on the bias I just cut them straight up and down and they came out perfect.I am in love with the results and cannot wait to make some spaghetti strap sundress for the summer.

I can not get it to feed evenly. Either it sews great on the top, but off the edge on the bottom, or great on top, but too far over on the bottom. It would really be nice if there was a video somewhere on how to get professional results with it. I hope with some more practice, I will be able to get a satisfactory job out of it. I only bought it for oven mitts and pot holders. I have no idea on how to turn a corner on a square or rectangle item with this tool, either.

I'm just not sure why I keep getting suckered into buying things from this CKPSMS brand (oh yeah they're cheap). They seem to get good rating but the products are just junk. The welding is sloppy, things don't align and on this one it looks like it was stepped on before they put it in the box. At this point it will cost me more to package it back up, get in my truck and go drop it off at UPS or USPS. This was my third attempt at three different items and I'm not buying another product from this company.

The media could not be loaded. I have a bernette coverstitch that has two holes but they were too far apart for this tool. We ended up drilling a hole our selves and using a different screw then the ones that came with it because it was too loose. Honestly the stitching came out beautifully. I give it a 5 star even though it has problems. This isn't for my machine but I didn't want to look for another tool so we had to do what we had to do which doesn't bother me at all as i sew. It gets the job done so I'm loving it

This has made sewing binding so easy for me and I love it but it broke the first time I used it. I had to salder it back together. Now that I have reinforced it, it works great.

This is the 32mm tape. Ends up being about 3/8” finished

Very well made. Easy to use, fits my Singer 99K and Consew Industrial machine.

The accompanying screws do not fit my machine so haven't been able to try it. If I can get screws this will work.

My industrial machine is set for heavy material. I had to work out wich presser foot is better and thicker fabric need definitely to be cut at 45 degrees. This actually made a huge difference. Also you need to learn the proper way to insert on the right spot the fabric you want to bind. It took me a hour since was my first time using this system but once you figure out all of this is a smooth and fun operation.

Habe das Teil heute ausprobiert. War etwas skeptisch, aber es hat gut funktioniert. Werde mir noch ein größeres Teil für meine Juki TI 2300 Sumato zulegen..

llegó mucho antes de lo q pensaba cumple todas mis espectativas y va de maravilla estoy encantada👍Lo volvería a pedir

I bought a different size first and it worked like a dream so I decided to buy a second, larger size. It's not properly made and fabric of any thickness cannot pass through channel... useless!