

Desertcart purchases this item on your behalf and handles shipping, customs, and support to Hungary.
⚡ Upgrade your RC drivetrain with precision and power!
The Traxxas 6852X Rear Driveshaft Assembly is a genuine OEM replacement part designed specifically for Slash 4x4 and Stampede 4x4 models. Engineered from premium materials, it ensures heavy-duty durability and long-lasting performance. Fully assembled and rebuildable, it offers easy maintenance and compatibility with Traxxas hop-up parts, making it the go-to upgrade for serious RC enthusiasts.


| Best Sellers Rank | #120,224 in Toys & Games ( See Top 100 in Toys & Games ) #43 in RC Vehicle Rotor Shafts |
| Customer Reviews | 4.5 out of 5 stars 1,279 Reviews |
R**L
Heavy duty, can take a beating. Recommended.
I blew a couple of these apart and then decided to buy the Traxxas axles. They have held up so far and I drive hard and wreck somewhat consistently. They take a beating and keep on moving. Heavy duty for such a small axle. I would recommend these to anyone.
G**E
Fit perfect...Still going!!
Im satisfied with product and recieved correct item.. I will definitely order more in the future.it was easy to install.. Thanks Amazon
K**S
Fits slash 4x4
Product is great nothing to say negative about my purchase
S**N
Running on 2 Rustler VXL's 2s lipo bashing. NO Issues.
I replaced a set of MIPS with these last year and they work just fine. We have these in both of our Rustler VXL's and we are running SPC 2s 5000mAh 50c batteries and do a lot of bashing. Hard starts and reverses and I haven't had any issues with them. The reason I replaced the MIPS is because they came on the car when I got it and they had put thread lock on the set screws...after heating them and trying to get the set screws out it finally just stripped so I had to drill them out. After that I just picked these up because our first truck has them and they have lasted well over 2 years. So far so good. Im not saying MIPS are not good..Just don't over use the thread lock. All in all I am happy with these on both trucks with no issues and I would recommend them. Oh and a lot cheaper on here than my LHS is...I hope this review helps. Happy shopping!!
F**4
2wd Slash
2wd Slash Raptor Works better than stock and so far they are holding up to 2.8 MT wheels and 3S 5900KV. I mainly run 2S but 3S is for kicks Update: Well I suppose they won't last forever. The only way to fix the stripped joints is to loosen the slipper way too loose or start out slow.. not a huge fan of either. I am using metal cvd's now and just a hair looser that 1/4 turn out. Wheelies are just to fun not to give up
M**E
Heavy duty rear axles.
These are a nice heavy duty axle. The only thing I ended up having to do was run my file around the hole for where the pin goes because it sheared depend when tightening down the wheel. So why does use the rat tail file on the inside hole where the pin goes and use my flat file around the outside on top of the holes to round it over just a little bit because it was just like it would snap them
T**D
Use this!
If you have brushless power on lipo in your Rustler or Stampede, Monster Jam, etc. then use these to replace your stock shafts. They have thicker pins and last much longer than the stock ones will. They fit right on exactly how the stock ones do with no modification necessary. Far stronger than what comes with the Traxxas 2wd trucks and they're not so quick to twist and cause suspension binding. Only one comes per package so you'll need to buy two of these. You'll be happy with the result especially if you have broken many stock axles like I did.
G**E
These fit the 2WD Slashes perfectly. A little bit meatier than the stock shafts, but no issues with clearance.
These fit the 2WD Slashes perfectly. A little bit meatier than the stock shafts, but no issues with clearance. On a side note, you have to remove the pin that connects the lower a-arm to the bearing carrier to remove the old shaft and install this shaft. The axle carrier has 2 pin holes at the bottom so you can adjust the height of the suspension. If you accidentally install the pin on the higher hole, it will cause the end of the driveshafts to slightly rub on the end of the a-arms. Make sure you put the pin through the correct lower hole when you reinstall the pin to avoid any clearance issues.
B**R
Traxxas Slash 4x4/2wd Antriebswelle
Habe mir diese Antriebswellen von Traxxas gekauft, dienen als Ersatz für meinen Traxxas Slash 4x4 Ultimate als auch für meinen Traxxas Slash 2wd passen für beide Modelle. Diese sind bei dem 2wd für den hinteren Antrieb gut geeignet besser als die Standard verbauten denn die gehen oft schnell kaputt. Sollten sie bei ihrem Traxxas Slash 4x4 Ultimate vorne einen Defekt an den Antriebswellen haben schauen Sie in ihr Handbuch und achten Sie genau auf die Artikelnummer. Klare Kaufempfehlung 5 Sterne 🌟 Top Qualität 👍 Der Versand wie immer super schnell👍
G**3
Not so reinforced... Seems deinforced to me
The plastic broke within 2 minutes of flat ground playing with a 2S battery, ridicule for an "upgraded" parts which lasts less longer than stock ones repaired. Update: I got refunded, thanks to the seller for their honesty
H**X
Good product
Came quick and performed as expected.
A**R
Great replacement
Work just fine
D**I
perfekt, kam früher als erwartet
passt genau, macht was es soll.
Trustpilot
3 days ago
1 month ago