💡 Light Up Your Night with LASFIT!
The LASFIT H11 H8 H9 LED Light Bulbs are designed for superior brightness and safety, featuring a 300% increase in visibility compared to halogen bulbs. With a lifespan of 30,000 hours and a quick 5-minute installation, these bulbs are perfect for enhancing your driving experience. The 360° adjustable beam pattern ensures optimal lighting without blinding oncoming traffic, making them a reliable choice for any vehicle.
B**T
Great H11 Led Bulbs
Bought these and installed on my wife's car low beams. Great price and the brightness is like day and night compared to your normal halogen bulb. They are very bright but not overpowering to on coming vehicles that it makes them think you have your high beams on. Definitely illuminates the whole road and feels like you're driving during the day time. They extend really far ahead of the vehicle and don't lose any brightness further down the road. Very simple to install depending on how you access your bulbs on your vehicle. Unfortunately on my wife's 2015 GMC Terrain I have to go in through the wheel wells so the part of accessing them is the pain in the rear. But once I was able to get access to the bulb it takes a second to swap them in. Not sure on the length of the lifetime yet because they have only been in a week but this manufacturer is definitely recommended for the price, quality, and design. They are not the most expensive ones or the least expensive, they are right in the middle and I think they are just a good as the most expensive ones, if not better. Definitely recommend purchasing them if you are looking to go to an LED
D**P
Worked well for me. Used as h11 low beams
I used this as a replacement for my low beams that require an h11 bulb. 2020 nissan kicks. They work great. Much cleaner and brighter light. Make sure that the bulb is vertical. The tabs on the edges are a little different than an h11 bulb but they fit. I had to look through the lens of the headlight while pushing in the bulb to get it lined up but it took less than a minute. My car uses H9 bulbs for its high beams. If your car does the same and you are worried about the bulbs being too bright you can run them in your low beams and test it. If they are you can just pop them in the high beams instead. I did flag down a highway patrol and asked if they were too bright. He was actually cool about it and drove towards me and said they were fine. They are only 40 bucks so its worth a try. I haven't had any flickering issues or many of the problems other people stated in reviews. Some of the flickering issues could be do to a low battery or early signs of a bad alternator. As far as some of the not fitting issues, inspect your car or truck. These bulbs have a little tail wire that runs out of the back of the bulb and to the connector. It makes it easy to plug the bulb in but it does take up a little more space.
A**R
Super bright H11 in 2011 Highlander. PLACE THE WIRE ON THE BOTTOM TO GET VERTICAL ALIGN!
These are super bright and great pattern with nice intense spot in the center. I just installed and tested the left side and will install the second tomorrow! I tried two other LED's and an HID Xenon kit from Xenon Pro and all of them were worse than the dismal factory Halogens. I am putting up this review immediately to supply a pointer for installation. All the manufacturers and every review say be sure to have the bulb vertical so the LED's project light into the projectors to pattern well. The problem with my car is that the light has a bug eye in the front and you cannot see the orientation of the bulb. I took a quick look at the yet uninstalled bulb and noted that when the bulb is vertical, the wire comes out either at the top or the bottom of the bulb unit. When you install this bulb in the "notches" and insert, once the notches rotate and lock, the bulb itself then turns as you rotate the cooling sink. Just turn the bulb/unit until the wire is facing the ground, and boom, you are done! I am a bit concerned about getting it out to replace since rotating the fixture does not disengage the slots. We'll see, but thrilled for now. I will bet the new fan versions last longer, will try them when these burn out.The left side is the new bulb, the right a brand new Halogen Zenith Silver Star. Pure white light and tons of it. I just the new LASFITS LAST!
C**D
Much brighter, but some troubleshooting required for install
While installing the bulb on the passenger side of my 2014 Prius C, I thought I may had either gotten a dud or accidentally killed it. I got lucky with the driver's side, no issues. Went straight in, twisted, locked and activated. This time, I pushed it the bulb, twisted, the lock engaged, and when I tested to see if the bulb was secure--POP--it came right out and left the lock ring inside the lamp. Whoops. No way to re-insert securely, I had to use the old bulb to squeeze into the lock and pull the ring out of the lamp. That was lucky! No big deal, just put it back on the LED light and try again, right?... except now the bulb wasn't turning on.I had unplugged, replugged, re-inserted it, fiddled and whacked it a couple times before I just about gave up and called it a dud. Then I noticed the bulb plug had the + and - signs molded onto it, barely visible at all. Well, it only goes into the plug one way, right? Nope. Between this bulb and my car, it's omnidirectional. I flipped the direction and presto: it worked.TLDR: test the bulb before you insert it and don't go pulling on the lock ring -- it comes right off. Minus one star for having an insecure lock ring. That is near impossible to remove without shoving a thicker bulb in there like the one I had available.
D**D
2018 Nissan kicks; high beam light perfect fit
LASFIT has always been my go to LED light. Always impressing with high visibility. After doing some research (Amazon advises that they done fit), figured I’d give them a try on my 2018 Nissan kicks. What do you know; fitment was spot on and they work with no issues. Not only does the vehicle look great, but the visibility is phenomenal. Thanks LASFIT for another great product! Highly recommend.
N**E
Fits GM headlamps with dust coversI
Just purchased 2007 Pontiac G6 in need of front lighting upgrade. These lamps are perfectly compatible with the headlight assemblies on this vehicle. Headlamp dust caps are retained, excellent, bright, reflector beam patterns, and no external led driver box needed, circuits built into bulb base. This vehicle also uses H11 bulbs with its projector fog lamps. Upgraded the fogs and beam patterns excellent and bright too. I am completely satisfied with the purchase of these LED bulbs.
P**S
Light is bright
Not fit in grand vitara 2023 but modified and fit perfectly.
H**N
Not bright
Color was white but did not do a good coverage as the OME lights
N**
This led doesn't fit to my car
Bad experience when i bought this product its shows it can fit with my car, but once i recived its not fit to my car, i am very diappointed.
B**.
Great Light Quality and Price
I installed these in my 2023 Tacoma and I am very impressed.These perform way beyond what I thought they would.The first picture is before I turned the bulb once it was in the housing. You can see in the second pic that this is what makes all the difference in the world. Turning the bulb removed any hot spots ahead of me on the road.You'll need to aim them and to turn the bulb itself so as to not have scattered light and yet have a great light for driving. Some LED bulbs do now allow you to turn them.In the dark these outperform the factory Halogen bulbs. I've tried $200 bulbs and these are as good hands down.I will report back once it warms up if I need to adjust these any more otherwise, they are just right.
S**.
Good quality!
It’s bright, no flickering, excellent quality and easy to install.
Trustpilot
2 weeks ago
1 day ago