1800 x 452mm Anthracite Grey Vertical Designer Radiator Single Column Flat Panel Modern Central Heating Panels Bathroom Radiators

Great. Looks very good. In use already for a while and no issues whatsoever. Works great, heats up well. I am very happy with my purchase. Bought those and replaced with different sizes all over the house. Love them!

looks great and good quality

Great looking and works very well in our kitchen.

Like most people I want my house to look good and of course radiators are not exactly the best looking things in the world so getting something that is a bit more designer but not breaking the bank is a real bonus. And these fit the bill. First off, the looks. I really like the sleek, retro-modern look and it works well in my kitchen. Now, the more important bits in some ways. The fitting of these takes some care because they weigh a tonne. Really. Well over 50kg so not to be taken lightly if you are fitting them by yourself. I have the advantage of being a marine engineer used to working with very large bits of steel combined with 30 odd years of regular gym use. If you can't hold 50kgs up off the floor then you will need help. The brackets are especially fiddly. There are four of them, top and bottom and you will have to be millimetre accurate in fitting them to make sure that they will slide between the tubes and allow both the top header and the lower feed tube to sit with equal weight on each. That took most of the time up to be honest and a lot of swearing and calculation to get it right. The brackets come with plastic soft supports and after a couple of goes trying to lift the rad onto them, knocking each off in turn I figured that the best thing to do would be to glue them onto the steel brackets which, I did and it worked. Now, the one issue that I have. The threaded holes that you fit the radiator fittings into. Most - if not all - radiators are 1/2" BSP female threaded and the radiator valve fitting is a taper thread that seals as you screw it in on the threads. This means the size is critical as you should be able to get a really good squeeze on the threads as you tighten the taper fitting in. And on this radiator that was a non-starter. I tried two different radiator valve male fittings and both easily screwed all the way in with little resistance. This meant that sealing them was not easy and in the end I had to resort to Plumbers Mate putty, which is not ideal. Basically, in my opinion the female 1/2" thread had been cut a little over sized and if you don't have the benefit of 30 years fixing ships or are a plumber then perhaps might be a real problem. Once I did get the threads sealed and the radiator on line I have to say that no only does it look very good, it does chuck the heat out thanks to a large surface area combined with being dark grey not white. In conclusion, excellent looks and heat output, but not easy to mount and the threaded holes for the rad valves were slightly over cut.

Very good radiator.

Ordered this radiator for our hallway, however it arrived warped and did not fit to the wall. Messaged the seller, and they responded very quickly and arranged for a replacement to be sent which arrived the next day. Excellent, customer service. The replacement was faultless and fits perfectly. Looks fantastic and heats very nicely. Great product.

Modern radiator just what I wanted for my kitchen

Ideal, looks really good!