FindTape Polyester Felt Tape [1mm thick] (FELT-06): 3/4 in. x 15 ft. (Black)

Used on a Tesla 3 to eliminate the seat belt height assembly rattle. Results were PERFECT! I can see car dealers using this for customer complaints for known rattle/squeaks. We did, and WOW! Just-right thickness, easy to install/remove, and works way better than anything else you want to use

Great product. Stuck real good. No issues. Felt part is very nice quality. Not sure why others had issues adhering this, but I had no issues. Easy peasy 😁

We replaced our entertainment center for one that is completely open (thus, no hidden storage). Since nice-looking bins cost about the same as vintage-look suitcases & chests, I went with the latter for a fun look (it was actually a better fit for our DVDs too). Unfortunately a lot of these have unfinished wood or metal on the bottom and I didn't want to scratch up the wood on the new furniture. I used this felt tape on the bottom outside edges of all the boxes - problem solved. It was a fast, easy & reasonably priced fix that protects the furniture without adding unsightly bulk. Looking at the shelves you can't even tell there's anything under the boxes. It's thin enough that you could put a strip or two on smaller items as well if you had a concern about them scratching a certain surface (for example, something with a stone base). This worked perfectly well & looks so great that I didn't even try the sheet of sticky-back felt I bought at the same time, I guess that can wait for a future project.

The black felt material on my vehicle that covers the interior car window weather stripping which allows the window glass to roll up and down smoothly without catching on exposed rubber was beginning to crack and peel off due to age.The rubber underneath was still in good condition and rather than buying a whole new weather stripping and going through the cost of removing the old and installing the new (which could be expensive depending on the vehicle)I measured and cut the amount needed to cover the exposed rubber, the felt thickness caused the window to peel the felt strip off, but this can be solved by using a shaving razor (think Gillette razor) to shave down a half a millimeter of felt for an ultra thin felt patch. After shaving down some of the material, the felt sticks without the window catching on it while rolling the window up.Looks good and so far I am pleased with the result.My only criticism is that the seller doesn’t offer a felt tape thinner than 1mm. Something paper thin would be outstanding.

I did some restoration to my father’s old gun cabinet. Stuck nice and was perfect width and color.

Don't buy. I bought this a couple of years ago and ended up not using at the time because I used some other sticky felt instead. Then when I went to use it I discovered that there is no working sticky layer. I peeled apart multiple layers of paper and felt trying to find it and it's just not there.

Was looking for a thin felt to replace the old felt on the outside trim of my truck. The one that touches the window.Stoked found a material suitable for my repair.Works great!Thank you!

As another reviewer stated, it is a bit difficult to remove from the paper backing. I've found the easiest/most consistent way to remove it is to pinch the actual fibers at any given corner and pull away by the fibers. This gives enough pulling force to remove it from the paper backing. If it does not work, just try another corner (if you've cut a piece, then you have 4 chances lol). While not "impossible", it can be difficult for the first few tries. Still a really good quality felt tape, I highly recommend it.

Klebt gut, ist gut aber...das ablösen der Klebe-Abdeckung ist ein Geduldsspiel und mindert des Spaß am Filzband erheblich, deshalb wohlwollend nur 4 Sterne, fast nur drei!

Great for inside pinhole camera to stop film getting scratched

Stuck like the blazes!

Très bon produit , je l’ai choisie pour finalisé un support de queues de billard , facile à utiliser, colle de très bonne qualité.

Works well