Linon Home Dcor Console Table, 42.01"w x 13.98"d x 30.71"h, Antique Tobacco

This piece of furniture is designed quite well. The legs come pre-assembled in two sets. There's a left side and right side, and that inverted "V" creates a sturdy brace in the middle. From there, the top board and the bottom shelf attach to the sides via dowels and wood screws, along with a brace in the rear. It takes about an hour or less to assemble. Again, the whole thing is well thought out and very sturdy. KUDOS!The drawer is the last thing that you assemble, and it's also the least thing about this piece of furniture. It's just OK. Yes, I said DRAWER. It looks like there are two drawers (two pulls) from the picture, but there is indeed only one. It assembles like you'd expect for such a thing; it has those two-piece metal roller slides like you see on a filing cabinet. After assembly, it takes a while to get the drawer aligned with the table for smooth operation, if at all.With the side table in its place, everything looks quite beautiful. It really ties the room together. Our old side table looks ugly now in comparison. We have it near the front door entrance and it's filled with nick-nacks and some big coffee table books. It's elegant. Almost snobbish. But quite the upgrade, to be sure.The price is perfect. Highly Recommended!

The quality of this table surprised me for the price. This is a beautiful console table. The materials are of good quality and the finish on the wood is flawless. The only issue was one that I read about before buying and that is the heavier finish wood pieces are not pre-drilled. With a cordless drill these were easy to complete. I would not worry about having to drill your own holes. Some holes are at an angle other than 90 degrees, but were easy to do. Be careful drilling into the underside of the top so you don’t drill too deeply and go all the way through the top. I am very happy with this console and plan on buying matching end tables.

I bought this as a temporary piece for our entryway, until someday when I find something nicer. It fits the need well. It is an attractive piece, just as pictured. It is sturdy enough. One negative is that the drawer does not slide well. I am not planning to use the drawer, but if you are, you might end up having to replace the drawer glides. The other thing I was really unhappy about was the very large safety warning sticker that was affixed to the outside of one of the side panels. I appreciate the need to warn about tipping, and that it is not strong enough to be used as a tv stand. However, given that the table needed to be assembled, the sticker could have been placed on the underside and still would have been seen by the customer. It did not need to be on the outside. Worse though, was that they went for the cheap adhesive that does NOT come off. I had to buy adhesive remover from Home Depot, which had to be left on a rag sitting on the sticker to soak in, then scraped off with a plastic scraper. Then a little elbow grease on top of that. Ridiculous amount of effort to get this very large sticker off the outside of my table. They couldn't have used a lighter adhesive that actually allows the sticker to be peeled off? No way it was intended to be left on, it's on the side panel of the table. Just annoying. Sticker is gone now and the table looks nice, and will serve it's purpose. Fine for the price.

The console arrived on time, and packaged well. However, it did arrive by post office vs. Amazon's normal carrier. Which resulted in me literally unloading my box off the postal truck myself. But I digress.The table is more "red" than expected and pictured so it stands out in the room.There is a huge, and I mean huge, tip warning sticker on the room facing side of the console. The sticker is not removable and now looks like a hot mess because I tried to remove it. Horrible idea putting that sicker on the room facing side.In addition, the assembly instructions could use some work and the holes are not pre-drilled so you better hope you have the right piece in the right spot as some of the pieces are not labeled.Assembled, it's a great looking piece of furniture despite the color being a bit off and the ugly sticker I now need to google tips on how to get off without damaging the finish. It also seems sturdy enough.

Beautiful design, but instructions aren't simplified. More of pictures and letters and assuming where they go by the photo. Drawer was a little complicated to get together, but is amazing once completed!

I wish I had read these reviews before starting the assembly. The end product is not bad, looks nice and feels fairly sturdy. However the assembly instructions are as bad as they come. There are actually no written instructions, so no "attach part 4 to part 1 using screw C", which is not necessarily a bad thing as long as the diagrams are clear and correct. They are not. It was so bad that I suspected that I had received a defective product, but after reading some of the other reviews, it is clear that I just comes this way. Here are some of the tings I found:1. There were no predrilled holes for where the screws go in the base unit (there were finally when assembling the drawer).2. The instructions tell you not to use power tools, but there were over 20 screws that needed to be screwed into the wood without any predrilled holes. This gets old very quickly.3. The first step in the instructions is not possible to complete. The instruction (just a diagram) is simply to attach one part to another using certain screws. However, as there are no predrilled holes for the screws, there is no way to know where exactly the one part should be attached to the other. If anyone is as foolish as I was to purchase this product, but smarter than I was so is reading this before assembling, then don't attempt to do step 1. Wait until finishing step 3 to do step 1 and it will become clear exactly where the part needs to attach to the other part.It is sad how laziness on the part of the manufacturer to not add predrilled screw holes turnes a relatively good product into a total frustration.

Bought this as a gift and my mom loves it.

I want to start off stating that this is an attractive Foyer table - a nice piece for decorations. However the workmanship isn't 100% compared to other furniture I assembled. I am a handy woodworker and had to make some minor adjustments to the drawer position - it wouldn't close properly. One big issue I had is the factory affixed an assembly sticker to two "finished" surfaces (one on the side of the table, and one on the top of the bottom shelf). These stickers didn't come off easily. The wood is a bit on the soft side and when I carefully rubbed of stickers off with my nails (and Goo Gone), it still left a noticeable indentation where the stickers were. If the stickers were on the opposite side, it wouldn't have been an issue. Overall, it is a cost effective - good looking piece of furniture.

this is poorly made and is MFD, looks cheap. I return immediately as the cost is way to much for fake wood.

Very nice looking - a little bit cheap quality, but doesn't look it.

A MAJOR problem with the item is a lack of pre-drilled holes in the top section. I have no power tools to drill holes myself so this is more than a minor inconvenience. Right now, the top surface is attached only by loose fitting wooden dowels, one of which did not line up with the hole it was supposed to fit into and I had to break it off so the top would lay flat. Not a solid item and not something I would recommend spending your money on.