Cable for rear view camera connection in Lexus cars with Enform GEN8 US market media-navigation systems. Using this cable you will be able to install an aftermarket camera Plug&Play without damaging the car wires. This cable can be used in cars with or without OEM navigation system. Checking for compatibility is quite simple: if the joystick is shaped as a disk or a puck and the main menu is of the "carousel" type then you can use this cable in your car. Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 24-pin socket. Depending on your car radio model, this socket may be located in a different place from the one shown in the diagram. After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection. PDC function (combined with OEM parctronic system) is supported. Note! The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line. Compatibility Head unit: Enform GEN8 with Pioneer head unit car models of US/CA/BR markets Additional compatibility condition: Cars with or without OEM navigation system, equipped with Lexus Display Audio Controller 2014-2018: ES250, NX200t, NX300h 2014-2019: CT200h, IS220d, IS250 2015-2018: ES300h, ES350, RC200t, RC300h, RC F 2015-2019: IS200t, IS300, IS300h, RX200t Note! Only NTSC cameras are supported. Note! FujitsuTen head units are not supported. Head units with microSD card navigation are not supported.
Trustpilot
2 months ago
2 months ago