Rugged Tools Guide Rail Bag - Protective Track Saw Bag For Saw Guide Rails up to 59"

Why did you pick this product vs others?:Cost vs functionality. Item is well made with both the side panels and interior dividers having sufficient padding. Zipper is industrial size and works. My Milescraft guide rails easily stored inside even with the connector strips in place. A convenient "wear pouch" at the end of each divide provides extra protection for the connector strips and keeps them from poking through the outer side panel. There are two, generous external side pockets for the extras needed for the panels. One could fit the saw guide but I leave mine attached to my saw all of the time.

VERY HIGH QUALITY IN DESIGN and BUILD. Made in China tag shows that some good stuff can come from China. I have two Makita 59" rails and a shorter one. Everything fits securely and safely in the two padded sides and are held by velcro straps about 15" from each end. At one end of the ballistic nylon case, there are sturdy orange end pockets for sliding rail-ends into.A center nylon panel running the length of the case keeps the rails from touching each other while secured to the sides.The zipper (high quality) is quite sturdy, running the full length of the case and around the corners to the fold and with zipper pulls at both ends.Two outside side pockets near the carrying handles hold a lot. I put my TSO track square along with the TSO track joining rails (and their screwdriver) in one side pocket with room to spare. The other pocket is currently empty. The two heavy duty carrying handles join with a velcro cover at the center. Think of this as something you would carry your skis in. It's luggage quality throughout - even to the point of having an ID tag window.One of my best amazon.com buys yet!

Festool makes great tools, but you pay a hefty price for the quality and functionality. HOWEVER, 100 buck for the track bag is NUTS! Just because it has the green Festool name on it. I think they feel they can justify it because they charge 145 dollars for the 55" track x 2 is 300 dollars worth of track (totally overpriced as well for 5 pounds of extruded aluminum) I have been using a snowboard bag I got on ebay for 15 buck but it wasn't a good fit but protected the tracks well enough. This bag is an awesome fit at a super fare price. The outside pockets hold the clamps, aligners and hose guide perfectly, on the inside there are individual velcro straps that keep the tracks secure and a full length sewn in flap that prevents one track from touching the other. There is also a sewn in ID card pocket so when your tools get stolen the creep knows where to send the thank you card. Really buy this if you are in the market for track saw track bag.

Great deal and very well made. Very functional and fits the tracks very well

Excellent track bag , 2 storage pockets for your accessories . The padding is top notch . The center divider puts the icing on the cake . Beats teams yellow , red , teal and Gucci tool ( aka festool ) bags quality wise by a long shot . I have 2 of these bags .. one for my cordless dewalt setup and one for my cordless makita . The tracks fit the bag well and the thick padding protects very good and that center divider which none of the othe brands have keeps them from rubbing together . Zippers , velcro holders and shoulder strap are well done and of high quality as well

Bag material seems very sturdy. Zippers feel a little light weight but I don't use my guide rails daily so they will probably be fine. The velcro straps that hold the rails are also not exactly industrial quality but again for my needs they should be fine. I do like the utility pockets to store extra parts and the fact that there are two was an unexpected surprise. Overall I believe this product is a good value for the money. My concerns about the durability of some of the components can only be proven or disproven with use.

Purchased this to hold two Festool FS1400/2 Guide Rails. Holds the Rails very securely with velcro straps and keeps the Rails divided so they don't rub on each other. For the price you can't go wrong. Well made and a good design and great protection for your Festool Guide Rails.

I admit, I am somewhat of a tool snob and I bought this case thinking it would be an inexpensive and cheap (poor quality) "bag" to keep my DEWALT tracks in. I was WRONG! This is a quality case. Zippers are heavy duty both on the main compartment and on the pockets, oh an it has pockets on both sides so I have plenty of space to keep the joiner and Allen stock tool right with the tracks. Main area has a very cushy separator to keep tracks from rubbing. Each side also has industrial velcro straps to secure track. I was pleasantly surprised with the quality and fit of this product. I am very happy with this purchase and will be looking to PowerTec for more cost effective tools and accessories.

Buena calidad. Sujeción y separación de guías. Buenas asas. Ojales para almacenarla. Cremalleras buenas, aunque con dudas.. veremos cómo se comportan con el tiempo.

Good quality and spacious, I can even carry a spirit level with the tracks, 2 side pockets and half the price of a festool.

I was surprised at the quality of this bag. The fabric is thick, the zippers work well, and it is padded. With the cost of the saw track, it was worth the investment.

It is a well-made product that helps me do my job efficiently. My Kreg kit fits.

Also ich bin für den Preis positiv überrascht, die Tasche sieht wertig aus, und die Reißverschlüsse funktionieren sauber. Die Polsterung ist ok, und an den Kanten ist das Material der Tasche auch ausreichend dick.Also ich finde den Schutz ausreichend für gelegentliches „umkippen“ oder unbeabsichtigtes „runterfallen„ aus geringer Höhe.Mein Kaufgrund war eigentlich das 2.Fach welches durch eine Zwischenlage zusätzlich gegen Kratzer schützt wenn man 2 Schienen transportiert.Die Tasche war noch nicht im Baustelleneinsatz, falls noch Mängel auftauchen werde ich es ergänzen.