Hopkins Towing Solutions 40985 Universal Multi-Tow Harness Connector

Product is a perfect fit and works well. Easy to read directions.

Worked like I thought it should

Perfect. As described. Fast shipping!

Definitely will recommend this item to repair, or replaced the your existen one

Fit nice with oem bumper trailer receptacle

Worked good. Wire colors did not match. It had 2 colors off ,but was real easy to figure out. Would buy again.

I used this to repair my factory trailer wiring on my 2009 F350. Someone had previously cut the harness. Fortunately this pigtail was long enough to splice back in and reach the plug mounted on the bumper. Wire colors matched up to my factory wire colors on the truck making the install very easy. I added waterproof heat shrink tubing for added piece of mind.

I opted to hard wire this OEM plug & play harness into my older truck's towing harness, which will make it very easy to swap out the receptacle if it ever fails. It also makes for a virtually weather-proof gasketed connection on the back of the socket; and all of my harness wiring is permanently soldered and heat-shrink wrapped. I drilled a 2" hole and surface mounted into bumper using stainless screws for a finished look. Plus the receptacle and wiring are a lot more protected up there behind the frame from water, dirt, and rocks than hanging down by the hitch on a flimsy rusty bracket.https://www.amazon.com/gp/product/B000B6NQHW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1I did not use the included crimp connectors. I soldered every connection and used a weatherproof heat-shrink tubing that has a glue inside to seal up the wires.https://www.amazon.com/gp/product/B073R69KNB/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1I staggered the connections to even out the thickness of the bundle and mated the new loom on this harness inside the factory loom on the towing harness. So visually, it's one loom all the way up to this OEM plug, and inside every wire soldered and inside a sealed weatherproof heat-shrink tube. This arrangement should be very bullet-proof and withstand any water or moisture.

Easy to install and use

SE INSTALARA EN UNA DODGE DAKOTA AUN FALTA SOPORTE...

I had no real dislikes with this product. My truck wasn't wired for towing. So that's why I bought this, along with 2 other products so my truck will be all set to light up the camper for hauling. I've had previous experience in wiring a vehicle, so Installation was fairly easy.

Worked perfect. Used but connected to wire in to my 2014 F150. Fit perfectly into the old outlet.

Works good on new trucks