EverBright 1156 BA15S 180 degree P21W Led Turn Signal Bulb 1141 7506 Front Rear Light, Canbus Error Free With Resistors, Amber/Yellow, 2800Lumen 3014 Chipset 144SMD (Pack of 2)

These have got to be the brightest turn signal bulbs I have ever installed. Holy cow they hurt to look at them and will definitely get the attention of motorists behind the motorcycle.

Easy to install and very bright. I choose the bright turn signal as my housing is blacked out. I dropped one of the bulbs and the glass shattered. The bulb still worked but looks a little unsettling inside the housing of the headlight.

Great product. Great price. Great shipping.

Update: I highly recommend you stay far away from this product.After the company sent me a replacement, both of those bulbs also failed because the adhesive that holds the bulb on the fixture melts because of heat ruining the connection and also making uninstall harder. When trying to pull out the bulb in the actual glass bulb comes off then you have to get pliers to dig the metal out of the socket. That process is hard enough, and even can damage the socket itself making the cars OEM equipment damage.Okay, first off I would like to say, this product works very well (Tested in my Hyundai Sonata 2016). I thought that I would need load resistors or wiring modifications or technical install instructions, BUT I did not need any of that! These bulbs were simple plug and play. I put them into each of my turn signals and they just worked! No hyper flashing, no dashboard errors, etc. The only ISSUE is that the nobs on the bulb did not line up with the turn signal bulb holder. BUT if you wiggle it left and right and put one side in first you can get them to fit!The other issue that I encountered was a loose glass housing around the led chips on the outside of the bulb. The glass was not properly adhered to the led housing which led to it shattering on install. I was very disappointed and had to try to reconnect the wiring without success. But, the other three bulbs all work perfectly without any hyperflashing.I hope the company can send me a single bulb replacement with proper glue that connects the glass to the outside of the housing. I will update this review to 5 stars if the vendor gets back to me via email.Also I will provide an update in a few months based on how the units are working in my car! I would highly recommend this product, it does everything it advertises! (And in my car all four led bulbs worked being installed without resistors!)

I was worried that this was going to be another hyper flash bulb. It wasn’t . It works and fits perfectly in my Scion Tc.

I bought these in February of 2019. They are super bright and work great until they suddenly stop working. I've replaced these three times already, which is turning into a pain in the a**. They are perhaps too bright which means they run excessively hot causing the failures. Well my right front turn signal is out again so I guess it is time to buy set # 4.The good:Crazy brightEasy to installThe bad:They die every year

The media could not be loaded.  Only rating 4 stars for now. After reading other reviews about its fragility I put a thin bead of superglue around the glass where it meets the base and they seem to hold fine. No hyperflash as I did get with other LEB bulbs. These things are BRIGHT! Which is awesome, but they got HOT. I mean really hot, where I would burn myself if I touched the metal base after I had them just flashing for about 3-4 minutes. I can’t imagine how hot they would get being on solid. I’m concerned it could be a safety issue if they get any hotter. I’m going to keep testing and keeping an eye on them and will report if I run into any problems.Old bulb vs. this new one in the pic/video.

Installed on a 2017 Triumph Trophy, replacing PY21W, installed in rear turn signals.Makes the standard incandescent bulbs seem sad in comparison. Anything that makes a motorcycle more visible to the oblivious people in traffic is a benefit. These do that well.If I wanted to find fault, they don't fit as tightly in the sockets as the bulbs that were removed. I doubt they will rattle loose, but it would be nice if they were a bit tighter.I will probably be getting some for the front soon (w/ the resistors.) I just wanted to ensure that they were enough of an improvement to warrant the added PITA factor of dealing with the resistors.Update: Added the fronts didn't need resistors or the upgraded relay I ordered - for my particular bike.

Firstly I wrote - ‘High quality product!!!!Recommended highly!!!!’But now I changed my review - Ordered another 2 kits for my 2 cars, have got them delivered- different packaging from the previous, missing 4 stabilizing modules- returned them back!!!!So much disappointment!!!!!!

Super bright bulbs. I think these came with resistors but I never used them. I ended up buying an led flasher relay instead.

Extremely Bright.. A little longer than most 1156 bulbs but still fit great.

Worked great for about 8 months and then started to flicker. So ordered another set and those are working great. Not sure how long it will last. Brightness is pretty good.

I really like this bulb. Super bright. Good LEDs, however, the main downfall, IMO, is the cheap base. The base is very flimsy. If you are going to put this bulb in, and never remove it, it should be fine. Ensure the socket is the exact socket, becaues if it is not, then you're going to be pulling it out with pliers, ruining the base. I ruined one, but I soldered wired on it and used it in my jack-o-lantern because I liked the rest of the bulb so much. It runs warm, but hasn't melted, so everything but the base is well made. I would recommend this bulb, as really, you put in bulbs and remove them normally and any bulb that doesn't fit as intended, you're going to ruin.