superbobi Portable Compact Dryer Blower Fan Belt for Panda PAN40SF/60SF Sonya SYD-40E/60E

Product is perfect and the instructions provided are great.

This saved our Panda dryer. The belt that came with the unit was stretched out, cracked and brittle. This belt should last much longer and is higher quality.

Easy to put on my Panda and Works more better then the other original came when I buy it ⭐️⭐️⭐️⭐️⭐️💯%Recomended❤️

This fit my Magic Chef dryer (model # MCSDRY1S) perfectly. It was easy to install once I figured out how to do it. The key is to remove the top 3 screws and the upper middle ones from the bracket 1st, and just loosen the lower middle ones (don't take them out yet!) Then carefully pry the top part of the bracket out just enough to slip part of the belt through, leaving the bottom half of the belt still on the outside of the bracket. Carefully slide the part of the belt you slipped through the top of the bracket down to the fan pulley. Then stop and put the top 3 screws back in tight, and the upper middle screws back in loose. Now remove the bottom 3 screws (and any zip ties attached down there) and gently pry the bottom part of the bracket out just enough to slip the remaining part of the belt through. Then slip belt over motor pulley.The upper and lower middle screws cause the drum to shift when loosened so be careful. That's why I didn't take them out all at once.

Wasn't sure if this would be compatible as I didn't see reviews for my particular model. My husband installed it and the dryer is actually quieter than the original. It was also a lot thicker than the original one. Has been working great!

I could not find a replacement belt for my Costway portable dryer. Bought this hoping it would fit and did! I did not read any reviews about using it on different brands but it works! Yay 😁

I didn't think I would be able to install this on my own. I was prepared to hire a handyman. I wanted to give it a go. But fair warning you have to remove the back panel. So many screws...so so many. But after I got the back panel off I followed the instructions and it was installed quickly. I still have left over screws...I just couldn't fit them into the correct hole...lol

Remove the top 5 screws. Slid belt down halfway. Reinstall 5 screws. Then remove the 5 lower screws. After moving the belt into place. Reinstall screws. Pull belt over the lower pulley. put the back panel back on.

I find it better than the original dryer belt of Costway dryer. So far it has been 5 days and it's going good with silent sound.Just my best hope is it will not ripped off like my previous one.

Good

It was the same size as the original and it wasn't noisy when operated. Overall it was a good buy that fixed my problem.

Authentic Quality Part.

Small part needed to fix an uncommon appliance. It would have been a hassle and a pain to have it fixed conventionally. Amazon made DIY possible and feasible.