Size:12-Pack These Ni-MH rechargeable batteries are ideal for a wide variety of small electronic devices. They have 1.2V Nominal Voltage, their voltage would be charged up to about 1.32V when they are fully charged. They are suitable to be used in those small devices which require high drain power consumption. For the batteries to have a longer lifespan, they are suggested to recharge below at 1.0A (1000mAh) current per hour.There are soldering tabs attached to both ends of the batteries for easier to replace or rebuild your battery pack. Specification of Battery:Nominal Voltage: 1.2VCapacity: AA 1200mAh (milliamp-hour) Minimum 1200mAhChemistry: Ni-MH (Nickel Metal Hydride)Rechargeable Times: Up to 1000 timesNo Memory EffectWeight: Approx: 22.5g/pcsDimension (Dia. x H): AA battery - 14x48mm
Z**Y
batteries work well
Bought 8 and made a 8-series pack from it to replace dead NiCD cells in RC toy battery pack that is no longer made. I cut open the pack with a hacksaw to get the old batteries out and then after soldering the new cells together and putting them in the pack I just superglued it back together along the hacksaw'd seams. It worked very well but there are rough edges from the hacksaw.... could probably fix that with some black epoxy / potting compound.Initially charged the cells at 0.1 amp for 8 hours to bring them all into balance.After being drained fully by RC toy until the toy would not work anymore, the cells accepted a full 1200mAh on my B6AC charger after being drained by RC toy. Is a monster RC truck and these batteries provide enough current for it without too much voltage depression (the RC truck and it's heavy duty motor work well on these batteries)I set my B6AC charger for 1200mAh capacity cutoff and it cuts off on the capacity before dV/dT determination (I have it set to extra-sensitive dV termination of 5mV).... so I think the cells are AT LEAST 1200mAh since the charger did not detect negative dV of 5mV after pumping 1200mAh into the batteries.....
W**D
I ordered solder tabs for a reason
I ordered a 4 pack of these batteries...advertised as having solder tab connections.What I received is 4x standard AA button top batteries.I ordered solder tabs for a reason.
J**B
Not as advertised
Advertised flat top with soldering tabs but came without tabs and round top.
T**I
Not as described
Not flat-top and does not have solder tabs as described.
Y**N
Je n'ai pas reçu les bonnes batteries
L'item reçu est pas compatible avec l article reçu. Les batteries n.ont pas de pattes pour souder.
Trustpilot
1 month ago
2 weeks ago