RunLessWire Click for Philips Hue – Battery-Free Wireless Smart Light Switch, 30ft Range – Works Natively with Philips Hue Bridge – Wall Mount Kinetic Switch - Decora Style, Gray

This does exactly what it advertises. I wanted a smart light switch to control my bedroom Hue lights and this does the job beautifully. It looks like a regular switch and integrates into my existing switch faceplate in my room for a seamless look. This is replacing a Lutron Aurora switch that required batteries every few months, the fact that there are no batteries now to replace is amazing. The only negative I've seen so far is it is fairly loud when it clicks, but that is a small price to pay for having no batteries to worry about. Setup was easy with the Hue app. Very happy with this purchase.

These are excellent switches for the Philips Hue ecosystem. They work flawlessly with other Philips products (a bridge is needed), and as an added bonus they need no batteries or wires! These can be added to an existing outlet, or just attached to a wall anywhere with the included mount. Within the Philips Hue app, the vast majority of setting for light settings, dimming ability, timed reactions, and color scenes are available.

They work very well and from a decent distance away form the hue bridge with ~3 walls separating them. Very happy that they don't need batteries and are so easy to set up in the hue app. I'll buy more when I have a bigger place because they're so easy to customize.

Great switch that does it's job well. Detected very quickly in the Hue App, which is more than I can say for the Philips made dimmer remotes these switches replaced. It took some playing to determine how these switches respond. A fast and deliberate tap/press is needed to trigger the switch. You're met with a satisfying, albeit loud, ca-chunk of a click sound. If you don't let it snap back immediately the press is reported as a short hold and you'll likely see no change in your lights. Configuration is incredibly simple in the Hue App. My switches are mated to ceiling lights (left unit) and nightstand lights (right unit). Each one is set up so that the bottom left switch is click to turn off/hold to dim. The remaining three switches click to turn on different scenes/hold to brighten. Physical installation was straightforward. The kit includes a wirenut to permanently short in-wall wiring for your lights; however, I decided to leave a standard rocker in place to keep direct control of my ceiling lights should the Hue bridge fail. (the far left switch is a ZWave fan speed controller). I cheated a bit by not actually installing the Click switches in a receptacle box. Instead I cut holes in the drywall to inset the switches and mounted the right most unit with drywall anchors. The 4 gang plate does a good job of tying it together. Previously I used two blank plate inserts and plastic Velcro strips to hold Philips Hue Dimmer Remotes in place. Overall I love the Click for Philips Hue switches. Loudness could be a concern for you though if installing in bedroom and you have a different morning routine from a partner.

The switch is surprisingly stiff. I think some won't mind it but it doesn't have as satisfying of a click as most wall switches because of the higher activation force required. I'm seeing if I get used to it. I like the look of the switch, it blends in pretty well, especially if you can mount it flush. It has also failed to activate very occasionally, if that persists I'll probably need to find another switch to get reliable control, but so far just once has this been an issue. I'd rather replace batteries than have it occasionally fail to control the lights. I had a lot of trouble installing it. With a pretty standard switch box in the wall I couldn't mount this without the surface mount plate, which leaves a pretty significant gap behind it, whereas any other regular light switch has fit just fine. I think this is due to a particular electrical box design where the mounting screws are a single strip covering left to right and blocking the space where the cover plate's comparably long clips would fit. Make sure there is open space to the left and right of the screws where the existing switch is mounted before buying this. I also couldn't mount the surface bracket directly, due to the metal electrical box, so screwing through it as a spacer into the center top and center bottom screws was pretty fiddly but did work. Setup on the Hue side is very easy and worked well. Just make sure you do the setup before replacing the dual rockers with the single rocker if you are planning on using that.

This is an amazing product and works perfectly with the phillips hue hub. Just remember to read the instructions as it does not connect in the same scan qr code and go manner as direct phillips hue devices. Super easy install once you read the instructions, blends right in with your regular switches no one would know it's a smart switch and best of all no batteries needes.

This is a great solution for an older house. Because of how philips hue bulbs work, the outlet needs constant power for the bulb to have smart functions, such as brightness settings for certain times of day. I wanted the light in my bathroom to be at different brightness at different times of day. Anybody who has gone to the bathroom in the middle of the night knows why this might be wanted. With this switch, I was able to easily replace my existing lightswitch. I basically created a hot wire so the outlet is always on/hot. This switch only controls the bulb via wifi. I REALLY like that this switch has no need for power. I live in an older building, and as such my lightswitches do not have a third wire. The way this switch is designed, when you actuate the switch, a small amount of power is generated, and that is the power the switch uses to communicate with the hue system. Very clever. The response time is very fast and just as quick as other official hue switches. Quality feels good, and it came with the option to have 2 separate switches (so potentially 4 different actions-left up, left down, right up, right down), but for my use case I only needed one switch. As such, the switch sort of 'resets' after you press it, so it is not your traditional sort of switch that 'clicks up'/'clicks down' and stays in that position. This took a little bit of getting used to for the first few days but now it feels fine.

Aside from the white switch, these are all RunLess switches in gray, with brushed nickel wall plates. It was hard to find a "smart switch" that fit into existing electrical box. I was wholly ready to get one with batteries (especially) if I could get a decora style switch and just deal with changing batteries sometimes. There were plenty of options out there that took batteries but would not fit a standard electrical box. A FEW that could- then I stumbled upon RunLess wire switches. They said (no batteries), I believe some type of kinetic energy supplied when you click the switch. To put it mildly,, I was highly dubious. Super small mounting depth - too good to be true. I ordered a couple and OMG!! UN- FREAKING - BELIEVABLE!!! I now have about 10 or so of these things. Will be adding another 15-20 as I expand my hue lighting throughout the house. I only have one switch that takes multiple attempts to work...and its the closest to the light it contros as well as my hue bridge, so I assume its defective. I will be contacting the company next week- we shall see how that goes. Anyway, AMAZING product!!!! You can have one single decora style rocker (I use these in areas that guests may use so they are not confused. You can program it to turn on one light, multiple lights, hold to dim or brighten (or make that setting adjusted however and whatever color you may want) with just one click. Now, you also have the option to have 2 rocker switches in the same decora space...now your possibilities are almost endless. Each direction on each rockerncsn control any light or lights you wish, then you have an option to hold down the rocker to perform another function. That's 8 controls, of any light or lights in your house. JUST AMAZING!! They also work flawlessly (with my one exception). If you're on the fence for any reason - forget it and get it. No-brainer. I'm a total techie and have seen nothing like this product. Oh, and by the way, the programming of each switch and whatever press or press and hold couldn't be any easier. I've purchased over $3k in tech gadgets over last couple months- this product from RunLess wire is far and away the best!!

took me few minutes to figure out how this works, in the standard one switch toggle setup this looks identical to a traditional flipper switch. there is also a dual flipper kit that came with the kit that I didn't use incase you want to control 2 lights independently from each other. This switch is so much better than putting battery modules hue wall module) behind the switch with a 5 yr batt life or another module behind the wall. works great with hue systems and some other lights I tried.

Si quieres algo sin baterías es una gran opción. Yo lo quise probar para un pequeño patio y falla un 20 % de las ocasiones a pesar de estar cerca tanto del modem como de la lámpara posiblemente a que no lo uso con frecuencia

Worked out of the box as expected, and best of all, it can be used with standard decora faceplate covers (which is why I bought it). It’s not as responsive as a regular switch; you need to wait a couple seconds as you switch between scenes. Otherwise, it’s really great. Probably expensive for what it is, but when you’re the only game on the market, that’s what you can do. Would recommend to anyone looking to double-gang and control hue lights.

i bought into the hue ecosystem early, before there were so many great alternatives. at the time, hue bulbs looked the best and were from a reputable brand. unfortunately hue bulbs are the biggest PITA when it comes to product support, similarly to Apple, they have an extremely closed ecosystem which significantly limits what you can manage them with. the problem isnt (or shouldnt be) a complex one, i wanted something that; -doesnt require maintenance (no batteries) -completely replaces existing lightswitches rather than being in addition to (because nobody other than me understands how my lights work) ive tried many different solutions and finally decided to try one of these, in my opinion, this is the only product that offers an acceptable solution. i can hardwire all the lights to always be on, and replace all my switches with something that looks like a regular switch, no more confused guests. my biggest complaint is that only one action can be performed at a time, if you use the dual rocker and press both sides in an attempt to turn on two different light groups, it will do nothing. my second complaint would be the click loudness, but based on how they work, im not sure thats avoidable and its totally acceptable. during setup, you are only given the option of assigning a single light group per rocker (IE: up and down both have to control kitchen lights for example, cant have up control kitchen and down control hallway), however, you can change this afterwards in the hue app (IE: could do press = on, hold = off). additionally, if you use hue essentials, you can have conditional operations for all 4 buttons, so if your lights were off, up could turn them on, but if the lights were already on, pressing the same button would turn them off, effectively allowing you to control 4 light groups on/off functionality with a single dual rocker switch.