GeeekPi Raspberry Pi 4 Camera Module, Raspberry Pi Infrared Night Vision Camera Module 5MP 1080p OV5647 Webcam Video Adjustable-Focus with FFC Cable for Raspberry Pi 4/3B+/3B/2B/3A+

Having busted a previous Pi camera trying to remove the IR filter, I needed a replacement. This one seemed good value at the time. Has worked out well, picture quality compares well with a couple of other similar cameras. I don't use the IR LED's so can't comment on them.

Camera tiny but reasonable quality. IR lights are on permanently so a relay of some kind needed in series to prevent overheating. Awaiting a method of mounting to test properly.

Whats to like. It works in the dark. Pitch black and the image is what you see in the picture. That purple hue is there during daylight though as well as night. I am using this with octoprint and the pi zero2w works perfectly with it. Focussed in on the centre of the bed it is pretty sharp. But as the hotend is at its furthest away it is slightly blurred, not an issue, just worth knowing that at this range from the subject the focal range is tight and a foot away things get blurry. That said, the fact this is in absolute darkness makes it a capable little camera and saves having to keep a light on. What's not to like? Camera and infra red lights come in 3 parts. It is fiddly to put together if you have big fingers. But not a deal breaker. The infra red illumination is lit permanently. Not really happy with that but again, if you are buying a camera for its infra red ability maybe that is just the way it is so we need to temper expectations there. Final potential downside is the fact that because the infra reds are on permanently the daylight images are corrupted by that light and have an unnatural hue to them. I wish there was a switch that would allow the infra reds to be turned off. But there isn't, and it wouldn't be an easy task to do either as the power for them is taken from the mounts where the screws attach, there are no wires. When all is said and done though, I bought this for the purpose of not having to keep the printer lit up by house lights when checking remotely. It does that perfectly so I am not complaining.

Camera came on fine but very hot and a terrible pink hue with or without ir sensors. Tried everything to adjust settings but always had pink hue. Removed the ir sensors and the image became colour but still with a terrible pink hue White balance is completely ineffective Item returned.

You need to power the IR LED a lot to produce enough IR to work further than a few feet. Good enough to pick up in dusk conditions.

Have just unboxed this great little gismo, plugged it in and it worked with a Raspberru Pi 4 Model B running Octopi 0.17.0. without doing a thing. There are no instructions supplied but i dont see as any are required. A very small Philips type screwdriver is required to assemble the unit if the LEDs are to be used (screws are approx M1 -M1.5 x approx 8mm long) Have not used in dark or low light yet (may not ever?), have not changed resolution - focuses down to approx 10mm easily but obviously depth of field is short. Generally would recommend so far.

This is a decent night vision camera. Works very simply and is good.

At first this camera performed adequately for my needs. It wasn't the best picture quality but it was fine for my needs. The camera has been used about twice a week for 4 weeks. Last night the camera would not work at all. The output was a corrupted frame buffer. I tried changing the camera cable as these are a point of weakness with any R-Pi camera. Even with a brand new cable the display buffer was corrupt. On close inspection I noticed corrosion around one of the pads connecting the camera to one of the infra-red LED modules (pictured). This camera has only ever been used indoors and has never been exposed to moisture. I can't recommend this camera module. If it can't last for longer than 4 weeks then it is not fit for purpose.

En el anuncio no lo pone, pero también funciona en una raspberry pi zero 2 w. Con el comando "raspistill -o image.jpg" hace imágenes a 2592x1944 con una calidad mas que aceptable y tarda aproximadamente 3 segundos en guardar la imagen o finalizar el comando lanzado por SSH, probablemente por la velocidad de la tarjeta MicroSD y la poca memoria SDRAM que tiene este modelo de raspberry. Me a gustado el color rosado del filtro nocturno, hace que las imágenes se vean mas claras que el típico color verde.

Acquistata per monitorare una stampante 3d, non avevo grosse pretese. Avevo l'esigenza di visionare sia in diurna che in notturna e il prodotto in questione assolve egregiamente tale funzione. Installata fisicamente su un raspberry 4 con rasbian, ho dovuto ovviamente solo abilitarne l'interfaccia. Non so paragonarla ad altri prodotti analoghi, ufficiali o non ma per ora soddisfa tutte le mie esigenze. Qualora dovessero sorgere problemi, aggiornerò la recensione.

Das kleine Kameramodul tut was es soll und liefert gut brauchbare Bilder für den Preis. Der Fokus ist manuell verstellbar. Vorsicht bei Tagaufnahmen: Es ist (absichtlich!) kein IR Filter verbaut um Nachtsicht zu ermöglichen, dies schränkt natürlich die Bildqualität am Tage ein (verfälschte Farben). Die beiden IR LED Module werden bei längerer Laufzeit doch unangenehm warm da es keine große Oberfläche zum Wärmeabtransport gibt. Auf der Rückseite befindet sich jedoch jeweils ein größeres Kupferpad auf das kleine Kühlkörper aufgeklebt werden können, was eine lange Lebensdauer der IR LEDs sicherstellen sollte.

Habe 2 dieser Kameras im Einsatz. Bei beiden sind nach ca. 7 Monaten im Abstand von ein paar Wochen beide LEDs ausgefallen. Kontaktfehler kann ausgeschlossen werden, da Zerlegen und erneutes Zusammenbauen nichts verändert hat. Generelle Qualität der Kamera ist vergleichbar mit der offiziellen Raspberry Pi Camera. So lange die IR LEDs funktioniert haben, war die Nachtsicht prinzipiell in Ordnung, wenn auch mit einer klaren Sichtweite von nur ca. 4 Metern suboptimal.

Pues la cámara funciona perfectamente en una raspberry pi3. La use para controlar una Ender 3 PRO mediante octoprint y aunque la instalación fue rápida he de decir que esperaba algo mas de resolución por el precio que tiene. Puedes comprar una camara ip xiaomi por menos precio y el resultado sera mucho mejor eso el tamaño de la camara se nota