LINKUP - [100cm PCIE 3.0 16x Shielded Extreme High-Speed PCI Express Riser Port Extension Cable 2020 Rev┃90 Degree Socket

Works like a charm

I bought this to use with an RTX 3080 Ti FE, precisely to avoid having clumps of power plugs messily lurking around the GPU and wrecking the airflow, and it's a joy. Using the longer length I was able to hide all the plugs away in the 3.5" drive bay and have a neat installation with perfect front-to-back airflow through the case. The silver finish is attractive too and enhances even my utilitarian build. Recommended.

This is what you need if you have the Phanteks Evolv SHIFT Air 2 case, as that case comes supplied with a 3.0 riser cable, and they don't sell a 4.0 upgrade cable which works with the case. My board and GPU are 4.0, so when the BIOS updated I no longer had an image as the board reset the PCI slot back to 4.0 when I originally downgraded it to 3.0 to work with the supplied riser cable. This cable, although expensive, had solved that issue. Still it cost more then the case itself, if I had the choice, I would not pick that case again.

All works OK with an RTX 3080, full PCI 4 speeds being achieved

Great!!Does it job.Great quality and looks amazing in my white computer.

Update: I upgraded to a rog monitor and I cant run 100hz without a crash, at 90hz it works but if you connect another monitor it crashes fast ! I don't think it can really handle the bandwith...Thank you for making this cable ! Upgraded from a corsair one, but i tested several they don't work on PCIE 4.0 !A few months back I decided to move from a I9 9900k, Aorus master, and Rtx 2080ti to AMD and I bought a Strix 570 F mb, a Ryzen 3950x a Msi 6800xt GPU and paired them all up with 32 gb 3600 corsair.2 X M.2 Samsung pro pcie 4.0I kept getting crashes, assumed its the CPU ( and it was a bit) as was getting errors on top of errors and a unstable system. ( the CPU had a few issues, tested on a friends system and it kept crashing, unstable at stock speed and Ram stock ! .. )Upgraded to 5950x and system seemed better, but sometimes refused to boot (Cpu errors and white light).Bought a crosshair hero Viii (used) , 1 boot achieved after 5 resets and 2 power offs, worst after long period being off ! Assumed its a faulty MB as the errors were different.Changed to x570 Aorus master, that one flat out refused to boot, tried different ram, same thing.Changed to another Crosshair Hero Viii, this one worked much better but still hard to get it started, eventually I tried the pcie on gen 3 and worked but with a lot of whea errors. (occt test)Was at the point where I thought it must be another bad CPU, honestly weeks of stress, I have build a lot of systems in my life and I do have a bit of I.T. knowledge..Stuck the new pcie riser cable today and so far very stable and no errors, just make sure you push it in well as I didn't the first time.The cable is well built but the red accent ruins the look, PLEASE MAKE IT BLACK !Lets see how it works and ill update !

It's actually a high quality 4.0 riser cable.Unfortunately it's not quite long enough for my nr200. I read a few places online that this would fit but it doesn't.Update:I have found a 90 degree 5cm angled one from LINKUP that I'm sure will fit the nr200 perfectly.

Looks amazing but unfortunately I can’t make it to be PCIe X16. Only X4 Gen 4.0. Indeed is a Gen 4.0 cable, but pointless. The ad states is PCIe X16 Gen 4.0 but got very disappointed when I booted it up and checked in GPU-Z.I have X570 Dark Hero VIII, Ryzen 7 5800 X3D and Asus Rog Strix 3090 OC. I’m afraid I have to return it after 3 hours of use.

Works with 4090. Make sure you get the right length. 5cm will be too short for most. I got 15cm and it's perfect, but a little long. Corsair 5000D case. 10cm should be good for the stand offs in this case.

the brown color is more red then the pictures show

A true 4.0 cable. After purchasing cheaper cables that were sold as 4.0 but were in reality 3.0, I decided to get this link up cable. Fits perfectly in my ZZAW A1P case with a Gigabyte B550i and Gigabyte rtx 4060 oc low profile.Don't waste your time with other cables claiming to be 4.0, Link up cables are the real deal. 3dmark pci express test show it hits rated speeds. A+!!!

I was a little concerned since I needed an extender that was longer than most standard offerings and some of the longer products had mixed reviews for compatibility and stability. While this product is more expensive than some others I have had zero problems with a 3090ti. Build quality and performance has been excellent. I have used it for a couple of months now so this is not a review just saying it is shiny coming out of the packaging.

I got this to connect my two 1080 TIs and it worked perfectly as it should. I have had it on my computer now for two years or so and I've had no problems. This was definitely a must-have for me when it was hard to find a new graphics card, and I appreciated that I could buy a 1080 (at that time) for a fair price and connect it with the one I already had.