❤ I love you three thousand times！Special emphasis: there is a film on both sides of the assembly box, please tear it off, stick it very tight, please tear it off patiently.
❤ 1:1 PROPORTION ARC REACTOR MK1 Model:Controlled by remote control, has 4 light effect modes：Constant bright mode, heartbeat mode, slow breathing mode, gradient mode and luminance adjustment mode.
❤ NO ASSEMBLY REQUIRED:Arc Reactor MK1 does not need to be assembled.All you need to do is to splice the transparent board of the display box and assemble the bracket and base.Pay special attention to the fact that there is a film on both sides of the protective shell that needs to be torn off..
❤ The plexiglass box is DIY, you have to peel off the protective coverings, then uncover the sticky strips on the edges covered in red. Use the base to help you, and dry fit the pieces together before taking off the red strips, so that you know how it's going to go together. Mine didn't fit together perfectly, but it was pretty close and you can't tell just by looking at it, only by touching it..
❤❤ If you are an IRON MAN FAN, it will be a good collection.Whether it's for friends . it will be a great gift.Your satisfaction is our greatest gratification, our products 100% quality assuranceBecause the whole product is composed of glass assembly to form, handle with care. If there is any damage in the course of transportati, if you have any questions about the products purchased, please contact us in time, we will try our best to help you solve the problem..
Imported from USA.
I love you three thousand times ❤ ❤ ❤
Contents:Arc Reactor MK1 LED Light, Display Box（Need to
assemble）, Remote Control,USB power cord
Arc Reactor material: polymer benzene + alloy
Base material: ABS
Display box material: Acrylic plexiglass
Display box size: 15.5*15.5*18cm （6.1*6.1*7.08 inch）
Arc Reactor(including bracket): about 12.5cm（4.9 inch）
Arc Reactor(including stand base): about 16cm（6.3 inch）
The plexiglass box is DIY, you have to peel off the protective
coverings, then uncover the sticky strips on the edges covered in
red. Use the base to help you, and dry fit the pieces together
before taking off the red strips, so that you know how it's going
to go together. Mine didn't fit together perfectly, but it was
pretty close and you can't tell just by looking at it, only by
touching it. There are also two extra pieces of plexiglass to
prevent damage to other goods. There are 2 holes in the base, the
center one is for the stand. Unscrew the bolt on the bottom of
the stand, put the bolt through the hole, and then screw the
stand tightly back together. The off-center hole is for the power
cord. The stand tilts, and you can just put the arc reactor into
the cradle. It just sits in there as long as you tilt it back
enough. There is no way to attach it in, but you don't really
need to, it sits in there just fine. The power cord is just
standard USB-B. You can buy little adapters such that you can
plug it into a regular outlet. There is also a remote control so
you can turn it on and off, control the brightness, and (for some
reason) set it to blink and control the blink speed and pattern.
1:1 Iron Man Arc Reactor MK1 DIY Finished Product Model Led Light USB With Display Box