🚗 Your Ultimate GPS Companion!
The GlobalSat BU-353-S4 USB GPS Receiver is a compact and efficient navigation tool featuring a built-in GPS patch antenna and a robust Sirf Star IV chipset. With 48-channel tracking and USB connectivity, it seamlessly integrates with Windows and smartphones, making it the perfect choice for on-the-go navigation.
Operating System | Windows |
Display Type | LCD |
Human-Interface Input | Buttons |
Compatible Devices | Smartphone |
Control Method | Touch |
Are Batteries Included | No |
Connectivity Protocol | USB |
Audio Output Mode | Monaural |
Mount Type | Dashboard Mount |
Compatible with Vehicle Type | Car |
Additional Features | USB GPS receiver |
Connectivity Technology | USB |
Map Types | Satellite |
Item Weight | 2.08 ounces |
Item Dimensions L x W x H | 2.08"L x 2.08"W x 0.75"H |
EU Spare Part Availability Duration | 2 Years |
-**-
I am very happy with it -- and for only 34 bucks!
This is by far the most pleasant surprise I've had in an electronic purchase in a long time. The unit it smaller than it appears to be on the photos, but that's a good thing.I realize this kind of device is at the mercy of whatever software is used, and I was lucky enough to borrow a few tablets, phones, and laptops with different navigation programs to test. For our vacation trip, I ended up choosing my wife's Surface as the hardware with Microsoft Streets & Trips (Not one of the programs we tested was excellent, and the MS product was the lesser of all evils). The one other thing I'll say about the Surface is, even though the screen is large, the "touch" part was maddening in a moving car, and the attached keyboard was also hard to use.Now, the GlobalSat:1. I tested it at home, first inside, away from any windows. It pulled in enough satellites to put me about 10 feet from my actual location. (I was in the middle of the room, and it placed me on a wall). I used Google Earth here, but did not choose to use it in my car later.2. In comparison with my phone GPS, the GlobalSat was always 10-20 feet better.3. The weatherproof GlobalSat has a magnet that should withstand hurricane winds, and the USB cord is plenty long. On the trip, I sometimes forgot to put it back on the roof when I got back to the car. While I drove, it was dangling near the floor. The accuracy was about the same, but I would lose the voice-directions (not the fault of the GlobalSat).4. It took the device around 30 seconds to give me a location after a cold boot.5. I dropped it several times on macadam and concrete and it never skipped a beat.6. It was recognized by all the programs I tried.My endorsement of the GlobalSat BU-353-S4 is unequivocal. If you don't want the limited real estate of a Garmin or Tom Tom screen, this is the unit to pair with a larger Android or a Windows device (Never used an Apple product). It worked with my 7" Acer notebook and my wife's new 10" notebook. The car we drove didn't have the optimal space for these, but other cars may.
S**S
Windows 10 programs need a 3rd party app to work
After spending several hours on the internet searching for a solution to the problem of Windows 10 navigation apps recognizing the GPS data I finally found a solution. I downloaded a program called GPSComplete from gpssensordrivers dot com. The program forms a bridge from the GlobalSat BU-353-S4 to whatever program or website you are using. So for I have tried Sygic GPS Navigation, Maps in Windows 10, Wego.here, and Bing. They all worked great. I'm sure it would work with any program or website that will accept location data. When you run the program to install the GPSDirect driver you set the baud rate to 4800 and select whichever com port that Windows 10 assigned to it. You can find the com port number in device manager under "Ports (COM & LPT)" or you can run the test application that comes with the GPS.From the GPSComplete website:Welcome to GPSComplete, the all-in-one tool for Sensor Drivers including GPSDirect, GPSReverse and testing tools.GPSDirect allows you to reuse your existing GPS source (a COM port, a Bluetooth device, a TCP/IP Source, or a simulation) and map it to a Windows GPS Sensor for your Windows applications that are GPS sensor-aware (Maps, etc). Using this driver enables all Windows sensor aware applications to get GPS information without directly accessing the GPS hardware. GPSDirect is useful for new applications to access information from older devices. GPSReverse does the reverse, maps a Sensor (either a physical one, ILocation or GPSDirect) as a virtual COM port. GPSReverse is useful for legacy applications to use a sensor which exists in modern PCs.
C**F
A simple, inexpensive, but accurate GPS receiver
I wanted a simple, inexpensive, but accurate GPS receiver to use with Google Earth's "real-time GPS" function. This GlobalSat BU-353-S4 USB GPS Receiver works perfectly for that use. It is small and unobtrusive and the long cord allows it to be placed on the dashboard of my car.With my laptop in my car and the GlobalSat BU-353-S4 plugged into its USB port my position is shown very accurately in Google Earth. I have taken a number of test drives and this GPS receiver updates my moving position with just a little delay (it may be Google Earth that is causing the delay). This GPS receiver is so accurate that if I drive one direction on a two-lane road and then drive back the other direction, the route lines in Google Earth can be seen to be separate and right over the corresponding lane used. Please note that for this setup to work - without any currently active internet connection - the satellite imagery must have been previously loaded into the Google Earth cache (do an internet search for "google earth offline" and follow links from there; it is possible to create multiple caches of different areas).The GlobalSat BU-353-S4 USB GPS Receiver comes with a small but handy application, GPS Utility, which can be used to check the functioning of the receiver. The app displays a sky map of all of the GPS satellites detected and the signal strength, as well as the raw data stream from all detected satellites. It also provides data for current longitude, latitude, heading, elevation, and speed. Please note that it appears that the computer port used by this GPS receiver cannot be used by two applications at the same time - only one app can access the GPS satellite data at a time - so if running Google Earth "real-time GPS" the GPS Utility app will not receive the GPS data at the same time.In summary, this GlobalSat BU-353-S4 USB GPS Receiver works perfectly and is exactly what I was looking for. It should work for any "GPS aware" application (such as Google Earth).
Trustpilot
2 weeks ago
2 days ago