✨ Light up your life, not your energy bill! 💡
The Hually Cupboard Light (2 Pack) features 24 warm white LEDs with advanced motion and light sensors that activate within 10 feet, turning off automatically after 15 seconds of inactivity. Powered by a rechargeable 600mAh lithium battery, it offers up to 3 weeks of use on auto mode and recharges via USB. Easy to install with magnetic and adhesive mounts, it’s perfect for closets, hallways, kitchens, and bedrooms, combining energy efficiency (A++ rating) with versatile lighting modes for modern living.
Brand | Hually |
Manufacturer | Hually |
Product Dimensions | 109.73 x 286.51 x 374.9 cm; 177 g |
Batteries | 1 Lithium Metal batteries required. (included) |
Item model number | NL016 |
Part Number | 656850 |
Number of Items | 2 |
Style | Modern |
Colour | White |
Shape | Rectangular |
Material | Acrylonitrile Butadiene Styrene |
Finish types | Unfinished |
Number of Lights | 2 |
Included Components | Batteries included |
Voltage | 3.7 Volts |
Specific Uses | Hallway, kitchen |
Special features | light, Auto on/off |
Shade Colour | warm white |
Shade Material | Polycarbonate |
Light Direction | Adjustable |
Power and Plug Description: | Battery Powered |
Switch Style | Touch |
Switch Installation Type | Wall Mount |
Batteries included? | Yes |
Batteries Required? | Yes |
Type of Bulb | LED |
EU Energy Efficiency Label | A++ |
Wattage | 5 watts |
Wattage | 8.6 Watts |
Item Weight | 177 g |
Guaranteed software updates until | unknown |
M**S
Very simple, very effective
Straightforward lights that are bright enough to see what you are doing rather than turning on the main light - ideal for stairs, bathrooms etc
M**B
Does what it needs to do
Great pair of PIR lights - extremely bright so avoid putting at eye-level unless you wish to be blinded in the middle of the night! Recharge very quickly with a decent battery life. Rather sensitive so also bear this in mind when positioning. Lightweight and rather stylish. Great product
I**4
Motion Sensor Light, Hually (2 Pack) Stick-On Night Light with USB Rechargeable Battery
I bought this 2-pack because the interior light in the boot of my car wasn't bright enough. The motion sensor lights are secured by double-sided tape (a permanent fix) or magnets (for flexibility). I chose magnets so I could pop them off and use them elsewhere. The total output from both lights is fine; one on it's own isn't enough.Issue 1 - the magnets are not strong enough. If you travel over a bumpy road the lights will fall off. Solution - use Velcro with a sticky reverse side. Stick one piece on the light, the other somewhere in the boot and hey presto problem solved and still removable. Issue 2 - one light failed after 6 weeks. Kept turning on randomly despite no movement. Contacted the seller who was absolutely brilliant. Fantastic response, no questions asked, replacement sent immediately.Blindingly obvious, except initially to me .... if they're in the boot and you have items moving around then you'll set the lights off. Also, for the same reason, they need to be held in your chosen position firmly.Would I recommend / buy again ? Yes, despite the 2 issues. They now work well, the seller was first class, they charge quickly and give off a decent amount of light.
V**E
Easy to use, bright and stylish design
I bought this lights because I have a fridge in the shed and the light switch is in a very inconvenient place. This lights have magnets at the back so I just placed them on the fridge door. They are bright enough and the sensor it's very good, they go on as sootas you enter the room and stay long enough to find the main switch.
L**A
They do the job it only half of what you buy will recharge dissapointing
I reviewed or edited my review ive never done that on anything I’ve reviewed before but my addition to all the positives I said below is its pot lick with these lights. They work when you buy them but when they need charging some will charge and some won’t so you end up binning them after the first use which is disappointing and means that rather than getting a good deal your actually paying double fir the ones that work as it’s fifty fifty half the lights will charge half won’tI would have bought more but I won’t be buying these ones againI don’t think I can send them back as I’ve had them fir more than a month when I discovered the problemThe following applies on the ones that workWhat I love is having light in my wardrobe don't know why I've not put lights in beforethese lights arnt expensive so you can't expect miricules and they don't always detect motion but you only need to wave a hand close by and they remember they have motion detection capacity. I don't see that as to much of a big deal I'm to busy enjoying seeing what clothes I have. the light is good I'd say you need two in single wardrobes if you really want to see properly and ideally 3 in a double but having said that one light is probably just about goid enough. I wouldn't bother with the self adhesive stickers as they are flimsy some wirk some don't work so I'd just go for sticking a screw up to secure them as they have capacity for being secured with a screw. (they don't provide the screw). overall i like them they wirk. I haven't needed to charge them yet so don't know great they will be After a charge but they work well on the charge already stored on them pre purchase.
P**N
Really functional, good product!
Nice little product! Comes in box with two usb charging cables (one of each light so can charge at same time) clear instruction booklet, double sided tape and magnets for fixing and of course two lights.Arrived charged so was able to fit and use right away, tried charger and a red light shows so you know it’s charging see pic.I put them in a deep wardrobe where it’s difficult to see and they seem to do the job well. I love the fact they are movable as you just lift it off the magnet and can place it back at any time. Motion sensor works well too although you must pass directly in front of sensor. Very pleased with this for the price
G**R
Works best in the dark!!!!
Used in a wardrobe, and works fine, although sometimes if the light in the room is bright this can prevent the sensor working correctly. Make sure you situate the sensor in a position where no (or little) external light source can interfere.Common sense really.
L**S
Magnets for holding the light are way too weak
These look to be well-made lights, they look good and the LEDs are bright. The rear of the case has two indentations under which are magnets, the intention is that these hold the light to a metal strip which is stuck to the wall with the sticky tape supplied. The problem is that the magnets are way too weak and, if mounted vertically, the light just slides down and off the metal strip. The back of the light isn’t flat, it has a pronounced bow, and the weak magnets have only point contact to the metal. There is a screw mounting hole but because the back is bowed the light doesn’t lie flat and can slide about. I fitted it into a wardrobe and it didn’t work reliably, switching on and off intermittently in the darkness for no reason. Not recommended.
Trustpilot
1 month ago
3 weeks ago