SOLAS9553-143-17 Rubex HR4 Stainless Steel 4-Blade Propeller - RH, 14.25" Diameter x 17" Pitch

Due to ventilation problems, I went from a 3 blade to this 4 blade of the same diameter and pitch. Mid-range cruise showed great improvement. 3 blade was 3700 rpm at 27 mph and 1.6mpg. The 4 blade is 3400 rpm at 28 mph and 2.3 mpg. I did lose 300 rpm and 4 mph at WOT. But the ventilation is gone!P.S. Don't buy a prop from "Kart-it", you may get a used one. (I did)

My 2023 Tracker Targa WT19 with Mercury 200HP Pro XS came with Mercury Inertia 14.0x19 pitch and was only reaching 5600rpm at WOT. Top speed was right at 50mph, and the top felt good, but the mid range at crusing speeds from 20 - 40 lacked alot to be desired, with the prop blowing out in the turns like crazy. Fill up the 47 gallon tank and at water to the 36 gallon aft live well and it was sluggish as all getout.All the prop selectors at Solas, Turning Point, and Mercury all called for a 4 blade 17 pitch in stainless as long as I was honest with the weight and capacities. This Solas prop changed everything, I could not be happier with the performance, at a third of the cost of a Mercury prop with the same specs. Mid range is strong as hell, i have much more bow lift capability, and reaching 5960 rpm, which is way closer to the Pro XS sweet spot. Still hitting 49 mph on top so sacrificed nothing and gained the world.

Great prop holds on plane at a lower rpm great performance from low end to wide open

fit my 200hpdi makes it run great

was too much pitch for my situation, went to a 15p

I have installed and used this prop a few times now. Great quality and exactly what I was looking for. I would recommend this to everyone.

gets the boat on plane almost 4 seconds faster and stays on plane 3 mph slower. did lose 4 MPH top end 54 vs 58. does exactly what I wanted it to do. went from a 19 pitch to a 17 pitch and rpms stayed in range

Works fine

Product as described works great.