PC Products PC-Super Epoxy Adhesive Paste, Two-Part 50ml Cartridge, Black 519

I just checked and bought this epoxy 3 years ago and I just used it again today to fix an iron leg to a table, it is still good. I used it so far to fix an iron tall lamp and to glue concrete pieces to my house slab in the corners of the house, maybe I used it for other thinks but I can't remember. The point is that after 3 years it is still good, the tube has a small cap with a seal that you turn it to seal the tube, very clever design. The epoxy gets very strong once it settles, make sure you mix it good and let it dry for few days.

This paste epoxy is thick and not as runny as some other brands. The cure rate is quick if the temp is above 60. Order more for my job. Ordered another package started to epoxy the baluster then the plastic flange broke I was almost done! Not good but managed to finished. If you buy check the flange for damages.

Used to bond the base of metal spindles to wood. Worked great. Highly recommended. Absolutely solid for this job.

I am a ceramic artist and needed some epoxy to fill in a split in the foot of a very large porcelain bowl. I bought PC Products PC-Super Epoxy Adhesive Paste, Two-Part 4oz in Two Jars, Translucent 46644. The split was not structural but aesthetically, it needed to be filled. It worked like a charm! The only negative is that it's white!! Not clear! I put it on several items, thinking it would dry to clear. When thick, it's white! I had to use a razor and a dremel to get it off some ceramics where I needed clear. The container looked just like the one on Amazon and says Waterproof Translucent Paste on it. The positive is that it works very well as a paste epoxy.

Used this product to anchor metal stair balusters to my handrail and stair treads. Worked perfectly. Hardened quickly. Strong bond. And all of this without the mess of measuring and mixing normally associated with epoxy products.

Probably one of the best glue/epoxies I've used over the past 30 years of extensive DIY work. Just the right blend of stickiness, non droop, and workability when applying. No way is this "clear" though. Definately dries to a milky white. I used this to epoxy in place iron balusters into a drilled wooden handrail on top and a base strip on the bottom. Was perfect for that application because there was very little drooping/running from the top holes. Dries HARD and I pity the person who ever has to remove these balusters in some renovation in the distant future.

This epoxy is unbelievable. I am replacing my 55 wooden stair balusters with 1/2" square, hollow wrought iron balusters. I was concerned about my new square balusters staying tight in the existing round hole where the old wooden balusters were. I have replaced 23 so far using the epoxy on just the bottom and I used just one tube of epoxy. I used about 1/3 a teaspoonful of epoxy on each baluster. I used Loctite PL MAX Premium on the top just to save money. I couldn't be more pleased. Although, you need to give the full 24 hours to cure, they seem rock solid after 12 hours. The dispensing gun is a must. I am a believer for life. I have already bought four extra tubes! You will not be displeased if you buy this product.

I made the mistake of ordering the cartridge which will only work with the gun. Going through the video it's very difficult to tell which product goes with what. I used it by just pushing the injectors by hand. It's not a bad product.Mostly my bad. But thought it would be useful to add this review so you're clear on what you're ordering.

great price for the size.

Works well with other epoxy cartridges too. Other than a bit of waste epoxy and syringe tip, this is probably the fastest way to epoxy anything. Be sure to shop around to get extra tips. You do not need the super long tips like the ones pictured here for proper mixing, the shorter green tips work just fine.

There is no cartridge with the product. You can’t buy it online. I used ones closed it properly and the second time I couldn’t use it. The hole was plugged in whatever I tried.