PL Premium Polyurethane Construction Adhesive, 10 fl oz Cartridge, 1 Pack - Versatile Construction Glue for Wood, Concrete, Stone, Metal & More

My application was to bond a plastic access panel to drywall and it worked perfectly - exactly as advertised. Pop the cartridge into a caulking gun and it's ready for use. One word of caution would be to apply first to the surface you are trying to bond (in my case the plastic access panel) and let it set up for about 20 min before applying to the surface as the directions indicate. This way it almost immediately bonds and holds in place as it will dry quickly enough so the item will not move around. It takes 24 hours to fully dry, but that time is necessary in case you are trying to do something that would disturb the item before set-up is complete. It's fairly easy to use but can be a bit messy if you're not careful and mostly because at least in my case the glue kept coming out of nozzle to quickly but that was probably more an issue with the caulking gun. Also wear gloves so you don't get it on your fingers, which I failed to do - it will clean off the hands, but not easily. The only other issue is it is pretty much a one-use product, since it will dry solidly in the nozzle blocking future use unless I figure a way to clear the blockage. If you're looking for a bonding glue that will work on virtually anything, that is easy to use and a good value, this may be what you've been looking for.

Worked great to mount a mantel on a granite fireplace. I didn't have a good surface to adhere the wood to, since previous crubling cement products were still covering most of the stone. I found a few small clean spots for the adhesive to stick to the stone bond to the wood mantel and it worked great. This product is amazing and had just the right amount of time to work with before curing to a very strong bond.

Alright folks, if you're ready to ditch mediocre glues and embrace the sheer sticky power of the gods, then listen up. Loctite PL Premium Polyurethane Construction Adhesive is about to rock your DIY world. First things first, this stuff is seriously potent. We're talking hold-a-brick-to-the-ceiling potent. Picture this: I accidentally glued my work boot to a 2x4. Did it ruin my day? Kinda. Did it destroy the bond between the wood and my boot? Absolutely not. Had to saw the boot off, but that 2x4 wasn't going ANYWHERE. Versatility? This stuff laughs at labels. Wood, metal, concrete, ceramic, even stubborn drywall that refuses to stay put – Loctite PL Premium handles them all like a champ. I've fixed wobbly deck chairs, reattached loose bathroom tiles, heck, I even used it to mend a cracked ceramic gnome (don't judge, the wife loves that creepy thing). Application is a breeze, even for clumsy folks like me. The stuff goes on smooth, gives you a little wiggle room for adjustments, and then sets with the tenacity of a bulldog chewing a favorite toy. Weather resistance? Forget about it. Rain, snow, scorching sun – this adhesive just shrugs it off. Now, a fair warning: this stuff gets MESSY. Wear gloves, old clothes, and maybe even a surgical mask if you're feeling cautious. Once it's on, it's on for good. But honestly, that's part of the charm. You know a project done with Loctite PL Premium is built to last. Bottom line: If you're tired of flimsy adhesives that fail the moment you look at them funny, Loctite PL Premium is your new best friend. This stuff is the duct tape of construction adhesives – it might not be pretty, but it gets the job done with an almost supernatural level of stick-to-itiveness.

Made my media blast cabinet much easier to seal up. I used it on tiny cracks around the corners, and it stuck firmly without any issues. It holds better than silicone and forms a decent seal. Wearing gloves is a smart move since it can stain your skin quite easily. It’s been quite a helpful addition to my project and should save some cleanup time later on.

good adhesive used for wood to metal, prep surfaces first

I bought this to re-glue two landscape block caps back in place. Note that the glue is a bit thinner and wants to come out of the tube, even after pressure is released. Hoping this fixes my issue!

This is did really works wow, had some patio bricks and fire pit bricks that came lose.. this definitely did the trick. So easy and great bond. Highly recommend

Used this to glue beadboard to the wall before nailing. Very strong, dried quick and easy to apply. I would use it for other projects as needed.

Good

Brilliant stuff

I put my rubber garage door floor seal over epoxy surface, work excellently

Very good adhesive. Was easy to dispense from caulking gun.

Awesome adhesive and works as advertised. However a little pricey.